Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Help! Turbo is whining?

Thread Tools
 
Search this Thread
 
Old May 3, 2009 | 09:45 PM
  #1  
rickay726's Avatar
Thread Starter
Evolving Member
iTrader: (9)
 
Joined: Apr 2007
Posts: 387
Likes: 0
From: NJ
Help! Turbo is whining?

so today i spent many hours trying to install this greedy intercooler and LICP. after finally getting it on i am now having problems my car. there is a whining noise coming from my car. after further driving on it home tonight i can here where the noise is coming from and it sounds like the j-pipe wich is the one connected to the turbo, with a gasket. it sounds like the air is getting sucked in and maybe boost leaking out of there and only partially spining the turbo because of lack of air? Or is it possible that somehow something got sucked into my turbo through my new intercooler piping and possibly bent a blade to the turbo? maybe even blowing the turbo =(?


someone help im hoping its jut the j-pipe and ill just need to get the correct tools to insure it is extra tight, and input is greatly appreciated.
Reply
Old May 3, 2009 | 09:53 PM
  #2  
eponti's Avatar
Evolved Member
iTrader: (12)
 
Joined: Sep 2006
Posts: 900
Likes: 0
From: RENO
Take off your intake so that you can check your turbo if the blades are damaged.Might have to replace your gasket.
Reply
Old May 3, 2009 | 10:59 PM
  #3  
rickay726's Avatar
Thread Starter
Evolving Member
iTrader: (9)
 
Joined: Apr 2007
Posts: 387
Likes: 0
From: NJ
the intercooler came with a new gasket, im just not sure if its tight enough.
Reply
Old May 4, 2009 | 07:28 AM
  #4  
rickay726's Avatar
Thread Starter
Evolving Member
iTrader: (9)
 
Joined: Apr 2007
Posts: 387
Likes: 0
From: NJ
can anyone help? please?
Reply
Old May 4, 2009 | 07:31 AM
  #5  
scheides's Avatar
EvoM Moderator
iTrader: (10)
 
Joined: Oct 2006
Posts: 4,827
Likes: 13
From: Minneapolis
Did you do a boost leak test?

Sounds like a bad leak, probably at that turbo outlet pipe. Add a *little* bit of rtv to that gasket for a good seal. Teensy, teensy teensy film of rtv, not a ton.
Reply
Old May 4, 2009 | 07:32 AM
  #6  
2 Deep Motoring's Avatar
Evolving Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 387
Likes: 0
From: Freehold,NJ
ricky, its alex... just get the proper tools and tighten the two bolts on the j-pipe... call me if ya need help getting the tools!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Evil_Rs
General Engine Management / Tuning Forum
2
Aug 3, 2013 11:44 AM
EvoRinga
Evo Engine / Turbo / Drivetrain
5
Mar 12, 2012 07:39 PM
mitsuclipsegsx
Evo General
10
Mar 12, 2011 12:42 PM
evolved0414
Evo Engine / Turbo / Drivetrain
14
Oct 1, 2009 01:47 AM
Greenspeed
Evo Engine / Turbo / Drivetrain
3
Mar 2, 2009 06:04 PM




All times are GMT -7. The time now is 05:46 AM.