What should I use in terms of a sealant? Any ideas? The fitting wouldn't thread into the pipe. Kind of stripped the threads. It sits in there pretty tight but it needs something to secure it.

 

Id like to knw too

 

loctite blue

 

JB-Weld JB-KWIK works excellent, it seals the fitting and will add some support to keep the fitting in a thin walled pipe.

It also is reasonably easy to remove if needed.

John-

 

+1. JB-weld would be what I use.

 

Thanks for the responses. Much appreciated. I figured something like JB Weld would work considering there isn't boost running through the intake tube.

 

I made an attempt to source some stainless fittings locally, but the only place I could find wanted like $50 for two fittings. I am just going to keep the brass and throw some JB Weld or Loctite Blue on there. If it doesn't work I will get some stainless fittings and have them welded on, but I think the JB method should work just fine.