BBK-Full Tuning Issue!!

Reply Subscribe

Thread Tools

Search this Thread

Dec 18, 2010 | 10:14 AM

#16

NitrousOxide

Thread Starter

Evolving Member

Joined: Dec 2008

Posts: 311

Likes: 0

From: UAE

Quote:

Originally Posted by evo7vii

Well I would stress making a thorough boost leak test and make sure that ur TB seals are leak free
I mean as previously said u sould be able to pressurize it and be able to hold 30 psi with no major
Leaks.

On the other hand, we can't call a tuner who is been doing a great job for more than 7 years in the UAE
Unprofessional. Your car having a problem might contributed to such unstatisfying gains but then again
Mustange dynos do read low.

More clues...hmmm well it was the only yellow M3 on campus with sponser stickers.

I completely agree that mustangs read low, but benchmark the torque to HP n u'll realize somethings wrong!!

n lets not forget that my turbo makes well over 400 on a mustang dyno.. you just heard CBRD speaking above

I gave him the car with some codes and everytime I ask him what is this he replies "wallah ma ba3ref"... It was my worst experience with a tuner, I'm being honest!!

Dec 18, 2010 | 10:34 AM

#17

NitrousOxide

Thread Starter

Evolving Member

Joined: Dec 2008

Posts: 311

Likes: 0

From: UAE

Quote:

Originally Posted by CBRD

Send me your rom,

you should pick up a 3 port, and Ill send you a basemap.

cb

Thank you very much.. I'll send you my rom and let u know once I recieve my 3-port

Dec 18, 2010 | 10:34 AM

#18

06MREvo

Evolved Member

iTrader: (90)

Joined: Nov 2005

Posts: 4,800

Likes: 6

From: Raleigh, NC

OP...With your mods you should have no problem hitting 400whp...I hit a little over 400whp on Chad's dyno at 26.5-27psi & a conservative timing MAP...Fuel wise you are probably fine with 780cc injectors but I would suggest throwing 1000cc injectors in there and not worry about it at all...Also you are still running a stock 02 housing?? I would definitely suggest throwing in a larger 02 housing or maybe an 02 dump if you like those...Is your BBK Full ported? If so an 02 housing would make the exhaust flow a bit better coming out of the turbo to the 3 inch exhaust...

Dec 18, 2010 | 10:39 AM

#19

G20

Evolved Member

iTrader: (13)

Joined: May 2003

Posts: 1,060

Likes: 14

From: Orange County, CA

hmm! some discrepancies here. i don't believe the 780cc can handle 30 psi and i don't think you can run that amount of boost on 93 oct gas unless the '93' over there is higher than 100 here.

Dec 18, 2010 | 11:56 AM

#20

CBRD

Account Disabled

iTrader: (60)

Joined: Dec 2004

Posts: 7,363

Likes: 8

From: york, pa 17402

Quote:

Originally Posted by G20

hmm! some discrepancies here. i don't believe the 780cc can handle 30 psi and i don't think you can run that amount of boost on 93 oct gas unless the '93' over there is higher than 100 here.

I run 30 psi on 93..

cb