Hey I just did mine and wired them all up. I used rsx coils. They work good they are just a bit to tall.

 

I used coils 90919-02240 for my diy spoolin up kit.

They can be found on eBay. I reccomend genuine denso.

It comes raw alluminum. You have to drill out. And have coated like I did if you choose.

Jdcustoms sells an identical kit which has a carbon fiber plate as an option which spoolin up does not offer as a diy

Me I would go with the jdcustoms now so I could get the carbon plate.

 

I made my own aluminum plate and harness just like that. My coils look like that to just taller. Might have to check into those coils to.

 

Here’s mine. I made the 1 and 4 wires a little short. Got a little excited and forgot to test fit before i closed everything up. So one of these days 4 needs extended.