So I'm running a aftermarket turbo its a borg warner ant it only oil cooled. my question is the coolant lines that use to run to the stock turbo can i just loop a line to those plugs and not have an issue? thanks again for the help

 

You can either loop them, or block them.

 

ok thanks for the info bro really helped out i was just curious cause i didn't want to loop them and they cause some kind of coolant temp issue. Thanks again!

 

no prob man, if you look at them one comes from the lower part of the water neck and the other feeds from the water pipe in the back. I personally welded the water pipe closed, and then cut nipple off the water neck, drilled it out, welded a 1/8npt bung on there for my water temp gauge.

 

if i had thought about it i would of welded it befpre i dropped in the motor .