Blouch 3.0 XTR - EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Blouch 3.0 XTR

Old Feb 21, 2016, 02:37 PM
  #1  
Newbie
Thread Starter
 
Join Date: Aug 2008
Location: Redditch UK
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Blouch 3.0 XTR

Hi

Has their been any results on this turbo yet?

I can't seem to find any on evolutionm or the MLR

Thanks jamie
Tonks is offline  
Old Feb 21, 2016, 02:40 PM
  #2  
Evolved Member
iTrader: (36)
 
e_kobz's Avatar
 
Join Date: Apr 2013
Location: Queen Creek, AZ
Posts: 2,956
Thanked 88 Times in 86 Posts
Try searching the CBRD BBK-C, same turbo minus the name. Not many people ran the BBK-C if I recall.
e_kobz is offline  
Old Feb 21, 2016, 02:44 PM
  #3  
Newbie
Thread Starter
 
Join Date: Aug 2008
Location: Redditch UK
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Originally Posted by e_kobz View Post
Try searching the CBRD BBK-C, same turbo minus the name. Not many people ran the BBK-C if I recall.

Cheers for that. Why didn't many people use them.

I knew their was a link between BBK and blouch but didn't know it was a similar unit
Tonks is offline  
Old Feb 21, 2016, 02:48 PM
  #4  
Evolved Member
iTrader: (36)
 
e_kobz's Avatar
 
Join Date: Apr 2013
Location: Queen Creek, AZ
Posts: 2,956
Thanked 88 Times in 86 Posts
Originally Posted by Tonks View Post
Cheers for that. Why didn't many people use them.

I knew their was a link between BBK and blouch but didn't know it was a similar unit
They're identical.

BBK Full JB - 1.0XT
BBK Full BB - 1.0XTR
BBK-B - 2.0XTR
BBK-C - 3.0XTR
e_kobz is offline  
Old Feb 21, 2016, 02:53 PM
  #5  
Newbie
Thread Starter
 
Join Date: Aug 2008
Location: Redditch UK
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Thanks any reason why the C wasn't very popular? I know a people on the BBK-b who had great results but not the C
Tonks is offline  
The Following User Says Thank You to Tonks For This Useful Post:
gsrboi80 (Dec 23, 2017)
Old Feb 21, 2016, 04:39 PM
  #6  
Evolved Member
iTrader: (5)
 
Join Date: Mar 2007
Location: California
Posts: 570
Thanked 22 Times in 17 Posts
There is no technical reason
Blouch IS the manufacturer and engineer of CBRD BBK line and CBRD & Blouch never put much effort into marketing comparee to FP,
And Blouch does not make any effort to sell today

Fact remains BBK/Blouch wheels are lighter then FP resulting in great response almost worthy of HKS 7460.
The BBK-B is impressive turbo.
-C has shown few great results but at the time -C and -b were not clearly distinguished so I cannot tell what was difference, but on stroker trying -C is totally appropriate.

Last edited by alpinaturbo; Feb 24, 2016 at 11:26 PM.
alpinaturbo is offline  
Old Feb 22, 2016, 12:45 PM
  #7  
Evolving Member
iTrader: (2)
 
ineedboostman's Avatar
 
Join Date: Dec 2011
Location: Tri State
Posts: 167
Thanks: 0
Thanked 4 Times in 4 Posts
How many lbs a min does the 3.0 flow?
ineedboostman is offline  
Old Feb 22, 2016, 12:48 PM
  #8  
Evolved Member
iTrader: (36)
 
e_kobz's Avatar
 
Join Date: Apr 2013
Location: Queen Creek, AZ
Posts: 2,956
Thanked 88 Times in 86 Posts
Originally Posted by ineedboostman View Post
How many lbs a min does the 3.0 flow?
If I remember correctly it was around 65lbs. It was in between the FP red and the black.
e_kobz is offline  
Old Feb 23, 2016, 10:45 AM
  #9  
Newbie
 
4G63 Sloth's Avatar
 
Join Date: Apr 2015
Location: Colorado
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
Here is information from MAP about the Blouch Dominator turbos.

Originally Posted by maperformance View Post
Ask and you shall receive!!!

For the Evo 8/9 Turbochargers here are the flow rates and HP Rating (Crank HP on Pump Gas).

Dom 1.0XT and 1.0XTR flow 47-48lbs per min
Inducer Wheel Size: 62.5mm
Exducer Wheel Size: 54.3mm
HP Rating: 480CHP

Dom 2.0XTR flows 56-57lbs per min
Inducer Wheel Size: 62.5mm
Exducer Wheel Size: 54.3mm
HP Rating: 570CHP

Dom 3.0XTR flows 64-65 lbs per min
Inducer Wheel Size: 67mm
Exducer Wheel Size: 60mm
HP Rating: 650CHP


For the Evo 10 Turbochargers here are the flow rates and HP Rating (Crank HP on Pump Gas).

Dom 1.0XT and XTR flow 47-48lbs per min
Inducer Wheel Size: 62.5mm
Exducer Wheel Size: 54.3mm
HP Rating: 480CHP

Dom 2.0XT and XTR flow 56-57lbs per min
Inducer Wheel Size: 62.5mm
Exducer Wheel Size: 54.3mm
HP Rating: 570CHP

Dom 3.0XTR flows 65-66lbs per min
Inducer Wheel Size: 62.5mm
Exducer Wheel Size: 54.3mm
HP Rating: 660CHP


We are absolutely ecstatic to carry the Blouch brand here at MAP and help them get these turbos out into your hands!
4G63 Sloth is offline  
Old Feb 24, 2016, 09:53 PM
  #10  
Evolving Member
iTrader: (4)
 
J_Striker's Avatar
 
Join Date: Jun 2011
Location: Tallahassee, Fl
Posts: 280
Thanks: 0
Thanked 2 Times in 2 Posts
I'd like to hear some first hand experence on this turbo as well. I remember long ago someone posted some results on the BBK-C. More examples would be nice to see.

https://www.evolutionm.net/forums/ev...r2-93-e85.html
J_Striker is offline  
Old Feb 26, 2016, 09:27 AM
  #11  
Newbie
Thread Starter
 
Join Date: Aug 2008
Location: Redditch UK
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Originally Posted by J_Striker View Post
I'd like to hear some first hand experence on this turbo as well. I remember long ago someone posted some results on the BBK-C. More examples would be nice to see.

https://www.evolutionm.net/forums/ev...r2-93-e85.html
If it's of any interest im having on mapped next Monday. Was due last Monday but had a faulty actuator so back on the RR Monday now
Tonks is offline  
Old Feb 26, 2016, 01:20 PM
  #12  
Former Sponsor
iTrader: (94)
 
Join Date: Dec 2001
Location: Los Angeles
Posts: 5,696
Thanked 20 Times in 17 Posts
That looks like it spools like a Black, instead of a Red or Green. S0 I think it all comes down to what you're looking for. I'd prefer quicker spool, but I am sure the OP is happy with his car
Erik@MIL.SPEC is offline  
Old Mar 14, 2016, 10:11 PM
  #13  
Evolving Member
iTrader: (2)
 
ineedboostman's Avatar
 
Join Date: Dec 2011
Location: Tri State
Posts: 167
Thanks: 0
Thanked 4 Times in 4 Posts
Would be cool to the map
ineedboostman is offline  
Old Mar 15, 2016, 06:02 AM
  #14  
Evolving Member
iTrader: (4)
 
J_Striker's Avatar
 
Join Date: Jun 2011
Location: Tallahassee, Fl
Posts: 280
Thanks: 0
Thanked 2 Times in 2 Posts
Originally Posted by Tonks
If it's of any interest im having on mapped next Monday. Was due last Monday but had a faulty actuator so back on the RR Monday now
Did you have this done? If so, what were your results?
J_Striker is offline  
Old Mar 15, 2016, 03:58 PM
  #15  
Newbie
Thread Starter
 
Join Date: Aug 2008
Location: Redditch UK
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Originally Posted by J_Striker View Post
Did you have this done? If so, what were your results?
Unfortunately their was a problem with the unit so waiting on a replacement from Blouch
Tonks is offline  

Thread Tools
Search this Thread
Quick Reply: Blouch 3.0 XTR


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.