Launch vid
Thread Starter
Evolved Member
iTrader: (6)
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Launch vid
I see that not many of you are visiting the Motorsports forum these days, so here's a vid that all should enjoy: 
Auto-X Launch
I posted a write-up with a full in-car vid in the Motorsports forum, but I didn't want the general populace to miss out on this close-up vid with good sound. I was lucky that someone thought to do this and then post it up for me...

Auto-X Launch
I posted a write-up with a full in-car vid in the Motorsports forum, but I didn't want the general populace to miss out on this close-up vid with good sound. I was lucky that someone thought to do this and then post it up for me...
Trending Topics
Thread Starter
Evolved Member
iTrader: (6)
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
I don't know - I just do it by feel. That wasn't a full drag launch, because I have a lot of negative camber, highly inflated tires, and about 10 feet of runout before tripping the wires. Due to those factors, I don't have to do a normal standing launch and can get rolling before hammering it.
Car looks so sweet!!! I compared your old in car videos versus the new setup and I also watched some of Trevor Jones's in car vids (very entertaining vids) and your new setup definately looks a lot firmer, as it should!!!
Last edited by JRB_EVO; Mar 1, 2007 at 08:23 PM.
Thread Starter
Evolved Member
iTrader: (6)
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Interesting, you're the second person to do that. I should do the same to see the difference. I hadn't really thought about it, because I was thinking it wouldn't be so obvious from the in-car perspective, but I guess it is..


