Scheduled Maintenance Tables & Fluid Part #'s/Quantities
Coolant ratio
I purchased the gallon of coolant from RussellM. What are you using as the ratio of coolant to distilled water?
I'm assuming the Mitsu Coolant is straight coolant and not pre-mixed. I believe the capacity of the radiator is 6.3 qt. (a little over 1.5 gallons). I have 1 gallon of coolant (1qt. = 0.25 gallons or there are 4 qt. to1 gallon). I was thinking of putting in 3/4 of the coolant container which would equal to about 3 quarts. The rest would be topped off with distilled water which would give me a ratio of about 48% coolant vs 63% if I used the entire gallon.
So when I do this do I first fill up the coolant reservoir with coolant and then put the rest in the radiator; topping the radiator off with the water?
I'm assuming the Mitsu Coolant is straight coolant and not pre-mixed. I believe the capacity of the radiator is 6.3 qt. (a little over 1.5 gallons). I have 1 gallon of coolant (1qt. = 0.25 gallons or there are 4 qt. to1 gallon). I was thinking of putting in 3/4 of the coolant container which would equal to about 3 quarts. The rest would be topped off with distilled water which would give me a ratio of about 48% coolant vs 63% if I used the entire gallon.
So when I do this do I first fill up the coolant reservoir with coolant and then put the rest in the radiator; topping the radiator off with the water?
Last edited by icrnk; Jul 21, 2009 at 05:27 PM.
Thread Starter
EvoM Staff Alumni
iTrader: (149)
Joined: Apr 2005
Posts: 6,108
Likes: 18
From: New Jersey
link to timing belt kits
https://www.evolutionm.net/forums/mi...tes-belts.html
for individual belts...pm russellm
https://www.evolutionm.net/forums/mi...tes-belts.html
for individual belts...pm russellm


