hey guys. i need a pic request. it needs to be off a stock evo 8 or 9. i need a pic of the fpr and the rubber hose that go's from the fpr to the sensor thingy that is bolted to the side of the stock intake manifold.

im re running all my vac lines and i really got my self in a bind here. thanks for anyone who can help.

 

I'd help you out if I knew what you were talking about...

better description of what you need a pic of?

 

hum. i thought i was clear but i guess not.

pop the hood and look by the left side of the intake manifold and the left side of the fuel rail. i need a pic of that hole area.

how is that?

 

pm'd

 

Hope this helps..
Not exactly stock evo but this part is at least.
LMK and I can take better pics if u need..

 

I dont even run the fpr solenoid never had a problem either. That was about 2 years ago now. I have all the soleniods disconnected and all my lines re-routed.

 

this pic is perfect thank you.

one question. there is a line that comes off the fpr. where does that go??? i thought it went to the sensor on the side of the intake manifold.

thanks for your help. great appreciated

 

ill be by tomorrow just look on my car

 

o ok yea that will work best. thanks dave

 

here is another pic that might be easier to see the FPR..
That braided line is the one you are talking about.
It comes out of the fpr and into the tee fitting that goes left to the solenoid and right back into the IM.

 

i dont remember factory lines running like that. and rich sent me a lot of good shots in email and his is different. ''meaning i think stock''.

or did some evo's come this way?

 

Mine definitely wasn't like that at all... No tee's right there from the factory on mine..

 

The tee is on cars with the factory boost gauge.

 

That would explain the T fitting on mine..
I still have the factory MR boost guage working, along with another higher psi boost guage.
I was just gonna unhook it, but it'll bother me to have it in there and not work.. lol