Before with the stock injectors I was running the tephra rom with the old defitinition file at 26psi maxing out the injectors

Now I'm using the pte 1000cc and my tephra rom seems to be the issue I guess "this is when I downloaded the new XML file for the categories on there are separated. And it seems like they lean out to stoich

Now I'm using my old stock rom and modified the loads and it runs like a charm at 18psi didnt increase boost yet but there are no leaks in the system

Anyone having trouble like this

 

What are your scaling and latency settings?

 

when I did this both trims were arond -.50

scaling 914

4.687 - 3.504
7.031 - 2.208
9.375 - 1.464
11.71 - 1.128
14.06 - 0.864
16.40 - 0.720
18.67 - 0.600

 

Any ideas?

 

check your "MAX AFR vs coolant temp" in main map fuel settings.
make sure your 171-181 temp column has a rich enough # in there. had a similiar issue leaning out and that number was high! error on my part, dont think the stock roms come with it high.

 

I put it at 40 because of the merlin evo guide thanks ill try it