@illusin- Thanks man! I know fuel will be the limiting factor so it'll be the first thing I take care of after I get her running. I was thinking of throwing on an inline pump but I most likely will go with a walbro 400/450 or double pumper setup, and like you said 1450-1600cc injectors. I really hope I don't run into anything else... This project hasn't gone exactly as planned.

 

Just a quick update; decided to go with a SD tune from Tom as well as go ahead and upgrade my fuel injectors to RC 1000cc's and mod/rewire my Walbro 255LPH pump. This should allow me to run decent boost on pump until I can afford to properly upgrade my fuel system for E85.

 

Update: Went to go start it for the first time, and the car wont start. It'll crank, but wont start. I have spark, fuel, and timing is dead on. I don't have compression. Absolutely 0 across the board, and it doesn't change when I add oil so I'm assuming I messed up on the valves, valve seals, or lifters. The other thread going into further detail can be found here.

https://www.evolutionm.net/forums/ev...-no-start.html