Im looking for a place that sell
This center poece to fit my 3 gauges .. It looks
Like a custom piece i dunno . Is there any place that sell
This piece like this??? I dont want just to buy he adapter place to put on my center piece. i will prefer to buy this whole piece ... Thanks guys

 

I could be wrong, and someone correct me if I am, but I believe Gruppe-S use to make those, I don't think they make them anymore.

 

Gruppe-S used to make them, then they were discontinued.

The way I see it, you have 2 options:

1- Speak to Cyanide, a reputable EvoM member that has done these before. If you go to his website you'll find his e-mail. Website linked.

2- Buy a Colt Speed Triple Gauge Panel, and then speak to Cyanide to purchase an HVAC relocation kit.

Obviously the second option is a PITA, so your best choice would be to speak to Cyanide and ask if he's willing to make you one.

 

nope you're right, although they were entertaining the idea of making them again recently. I guess somewhere along the lines the mold that the company they had make them was using got lost. But supposedly there is an ebay company that is selling a piece similar to that although I haven't checked it out since I have a gruppe-s one to begin with.

Here's the link to the thread on the ebay one.
https://www.evolutionm.net/forums/ev...-gruppe-s.html

 

lancershop.com has it

 

I would call and confirm that they have it in stock before ordering, I have had issues with lancershop still advertising parts as available that have been discontinued or have an unknown wait time before.

 

I was just about to edit my post and add this.

Another one is this: http://www.ortizcustompods.com/mitsubishi.html

Not really my kind of thing... But, to each his own...

 

Yeah, lancershop shouldn't have them... They've been discontinued for a very very long time. I doubt they'll have any of these lying around.

 

i need this so bad .. This is the only place i will like my gauges mounted

 

Yeah, they are going for big money since they haven't been produced in a few yeas. The 52mm ones are worse to find than a 60mm one but either way it will be hard to find.

 

I would recommend a 42DD triple gauge pod. That and a radio relocation and you're good to go. I think it looks far better than the Gruppe, as you get to use your factory HVAC panel.

 

There is a Gruppe-S one on ebay
http://www.ebay.com/itm/Lancer-EVO-HVAC-Gauge-Panel-Gruppe-S-52mm-SUPER-RARE-HARD-TO-FIND-EVOLUTION-/201095342998?pt=LH_DefaultDomain_0&hash=item2ed2376b96
but it's $500...

 

Which one is the 42dd can you send me a link

 

Damn if he gets that much for it makes me consider selling mine, that's at least valves and studs to finish up the parts list for my head rebuild. I forgot to also add that there is a company that makes a carbon fiber version that looks similar to the gruppe-s one with angles and all. But you have to cut out the holes for the gauges yourself so the up-side of that is that it will fit either 52mm or 60mm gauges.
http://roadracemotorsports.com/store...roducts_id=726

 

lol I was thinking the same thing. Hell, All that info is datalogged and I can just set limits in AEM to blink a LED or something if I'm worried about not being able to monitor. Heck, not like I look at them WHILE racing, just before and after...