I installed my MXL Strada on an evo 8 with Vipec ECU. Everything works fine, the data is received by the dash thru RS232 and I managed to configure the dash the way I wanted. I just need some help connecting the stock fuel level sensor to the analog input of the dash. Did anyone attempt to do this on an evo 8? I would really appreciate some help. I connected the pin 51 from plug C-02 that normally connects to the stock gauge unit, which is the pin with signal from the stock fuel level sensor to Analog channel 1 input on the MXL but that does not work.

 

easiest way is to order this

http://www.ironcanyonmotorsports.com...el-sender.html

 

thanks for the info! That's what I'll do. So the MXL can't read resistance change at all on the analog inputs?

 

Nope.. you need to convert it to 0-5v

 

Link above is not working.

Could you please send me another?