added to my list of to do's

 

4 screws to take those lights out. That's it no nothing else they are easy to even get. Why god would you tape off the whole rear of your car.?

 

i used tint for mine instead of spray and i also cut straight lines on the turn signals with a razor blade and it came out nice, only thing is its just a LITTLE bit darker than the OEM evo 7 lights that my buddy has. we park next to eachother and you can tell but making these reps only for me $80 with tint and lights so im not complaining lol

 

lol i thought that

 

where can i find a set of tail lights like these ? you can email me deanoxx2003@yahoo.com

 

ebay for the Depo ones. they are $175ish shipped or get the LED ones for $250

 

Nice DIY, all evo's should have came this way..

 

iv had a look on ebay i cant seem to fine any thow ..i wanted a set with the matt black back ground

 

Very NICE post!!!

Thanks everyone for sharing their experiences!

 

No offense but this is a quick way to do evo 7 replicas without taking your lights off of the car in case your running late to work or before a date you want evo 7 tails before you pick her up etc... lol

 

the picture of the car taped off was worth a good laugh haha send that **** to #evogram or #evoaddicts on insta, youll definitely get featured hahaha.

 

What clear coat did you use? The two part automotive clear with the hardener? Looks great I will most likely go this route.

 

I used red metalcast paint and it turned out well! Be sure to be patient on sanding haha!

 

I just did mine a couple days ago. They don't look bad but they look a bit cloudy when the brake lights come on

 

I painted mine with VHT Niteshades red....turned out better than i coulda hoped just fliped the bulb sockets for reverse and turn signals and away you go.....so much better than those cheesy stock tail lights