For everyone who needs to program a new key you must have the following:

The new key chipped and cut
2 existing working keys

1. Insert a working key and turn it to the on position for 5 secs
2. Turn the key to off and remove
3. Insert the second working key and turn it to the on position and wait for the Theft-Alarm indicator to blink twice
4. Insert your new chipped key and switch the key to the on position and again wait for the Theft-Alarm indicator light to come on and this time it will stay on for 3 seconds.

If the Alarm blinks three times there was an error and start the process over again.

If you do not have the second key be ready to sell body parts to a dealer to reflash your ecu.

 

ALL Dicussions Go Here!