Dyno Flash "E FLASH!" now available
Thread Starter
Account Disabled
iTrader: (91)
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally Posted by deZerteVo
I read in a thread somewhere that the Dealership will have to reflash the ecu to add an extra key (I only have one right now, and need a second)? Is this true? if so I should do the eflash after I have that ... I assume. I got my Tactrix cable yesterday and waiting til next week to do my eflash...process of moving and everthing is in boxes.
As long as you have the proper year ecu and proper imobilier code it will work
if you need to add keys that is a dealer function with the imobilizer (seperate box)
Originally Posted by DynoFlash
The book is done - I am going through proof reading now
Originally Posted by UCB
what are the hp/trq gains of flashing a bone-stock evo IX. Any fuel savings on the highway if you stay otta boost?
Originally Posted by DynoFlash
5 more E FLASH! maps processed in the past 4 hours
I am taking a break to work on my race car and will try and send out another two maps later this pm or actually am !
I am taking a break to work on my race car and will try and send out another two maps later this pm or actually am !
NUFF RESPECT BIG AL.
Evolving Member
Joined: May 2004
Posts: 189
Likes: 0
From: Hawaii
I just ordered two maps from Al. One for a stock Evo IX (with MBC only), and one for when I install my BR TBE, UICP, etc. At only $50 a pop, it's worth spending a little extra to have a flash for right now, and to have one ready on-hand when I install my mods this or next weekend.
One thing I forgot to request was removal of DTC for rear O2 sensor detection of the lack of a cat. When I was reflashing LS-1s, it was pretty easy to make sure having no cats did not throw a DTC, but looking at what is available for editing via Ecuflash, I don't see anything to edit in regards to disabling the triggering of such DTCs. I guess openecu.org has not found that section of code yet, but does Al have the ability to get rid of that with his hex editor? It sure would be nice to not have to wire in another rear O2 simulator, or deal with those physical solutions such as ani-fould extenders, etc.
So here's the actual question.... Al, I'm not going to be running a cat. Will your flash eliminate the triggering of the "no cat" DTC?
One thing I forgot to request was removal of DTC for rear O2 sensor detection of the lack of a cat. When I was reflashing LS-1s, it was pretty easy to make sure having no cats did not throw a DTC, but looking at what is available for editing via Ecuflash, I don't see anything to edit in regards to disabling the triggering of such DTCs. I guess openecu.org has not found that section of code yet, but does Al have the ability to get rid of that with his hex editor? It sure would be nice to not have to wire in another rear O2 simulator, or deal with those physical solutions such as ani-fould extenders, etc.
So here's the actual question.... Al, I'm not going to be running a cat. Will your flash eliminate the triggering of the "no cat" DTC?
Thread Starter
Account Disabled
iTrader: (91)
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally Posted by Roberto
I just ordered two maps from Al. One for a stock Evo IX (with MBC only), and one for when I install my BR TBE, UICP, etc. At only $50 a pop, it's worth spending a little extra to have a flash for right now, and to have one ready on-hand when I install my mods this or next weekend.
One thing I forgot to request was removal of DTC for rear O2 sensor detection of the lack of a cat. When I was reflashing LS-1s, it was pretty easy to make sure having no cats did not throw a DTC, but looking at what is available for editing via Ecuflash, I don't see anything to edit in regards to disabling the triggering of such DTCs. I guess openecu.org has not found that section of code yet, but does Al have the ability to get rid of that with his hex editor? It sure would be nice to not have to wire in another rear O2 simulator, or deal with those physical solutions such as ani-fould extenders, etc.
So here's the actual question.... Al, I'm not going to be running a cat. Will your flash eliminate the triggering of the "no cat" DTC?
One thing I forgot to request was removal of DTC for rear O2 sensor detection of the lack of a cat. When I was reflashing LS-1s, it was pretty easy to make sure having no cats did not throw a DTC, but looking at what is available for editing via Ecuflash, I don't see anything to edit in regards to disabling the triggering of such DTCs. I guess openecu.org has not found that section of code yet, but does Al have the ability to get rid of that with his hex editor? It sure would be nice to not have to wire in another rear O2 simulator, or deal with those physical solutions such as ani-fould extenders, etc.
So here's the actual question.... Al, I'm not going to be running a cat. Will your flash eliminate the triggering of the "no cat" DTC?
At the present time the parameter for the rear 02 sensor is not identified in iether my own hex flashing appllications or in ecu flash so I would suggest using a common spark plug anti-fouler on the rear 02 sensor which should do the trick
Also, just for refernce in 2006 OBD II you can not use a electronic MIL eliminator in line with your rear o2 sesnor signal as it will trigger a rear o2 sesnor cel
unlike previous years it looks for a varying signal
I got my map at midnight. Thanks for putting the hard work in to get these out to us. Mine was for HKS 272 cams and fuel pump added to my setup. I like what you've done with my car.
Still waiting for my map.
Sent my payment in last friday. Sent 3 emails with my mod list and my stock 05 rom.
How long have you guys had to wait for it? Don't want to be a pain in the a$$, but I'm getting some work done tomorrow and would like to feel the effects of the flash...
:-(
Sent my payment in last friday. Sent 3 emails with my mod list and my stock 05 rom.
How long have you guys had to wait for it? Don't want to be a pain in the a$$, but I'm getting some work done tomorrow and would like to feel the effects of the flash...
:-(
Thread Starter
Account Disabled
iTrader: (91)
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally Posted by kapolani
Still waiting for my map.
Sent my payment in last friday. Sent 3 emails with my mod list and my stock 05 rom.
How long have you guys had to wait for it? Don't want to be a pain in the a$$, but I'm getting some work done tomorrow and would like to feel the effects of the flash...
:-(
Sent my payment in last friday. Sent 3 emails with my mod list and my stock 05 rom.
How long have you guys had to wait for it? Don't want to be a pain in the a$$, but I'm getting some work done tomorrow and would like to feel the effects of the flash...
:-(
In some cases spam filters have temp delayed my receipt of some attachments
I got my hopes up last night thinking I might have it this morning, but I'm still waiting. Please Al, put an end to this, the waiting is killing me! I guess I can think of the gas I'm saving.$$$$$$$$$$
I PM'd all my stuff to you Al.
My paypal name was kapolani@hotmail.com
I got my car worked on today. I have my mods, but no eflash....
:-(
My paypal name was kapolani@hotmail.com
I got my car worked on today. I have my mods, but no eflash....
:-(
Originally Posted by fsugatorbait
Go to openecu.org and download the newest version- 1.28.
I understand the newest version of ECUflash has been produced specifically for those of you that have the EVO IX. I have the VIII and the previous software. Does this mean that I have to download the newest version as well?
If that is so, I went to the OpenECU website, and the newest version is only for Window's XP. Where can I find it for Windows 2000?
Thanks
Tactrix Cable Received...
[QUOTE=pure_evo][QUOTE=[color=red]DynoFlash[/color]]After a bit more testing I will offer a through the mail kit which will have a CD with the flashing softwear, a tuning map for pump gas and a tuning map for race gas customized to match the specified modifications of the end user along with a flashing cable if needed. Also included will be a 100% stock pump gas map and a valet mode map. I will also include a detailed step by step instruction sheet to guide users on how to install the softwear and load the various maps.
I ordered my Tactrix Cable this morning and they said it'll take 3-5 business days. I, just like many of you, am anxious to get my E-flash.
By the looks of this through the mail kit, that seems to be a great idea. It sounds to me like a "rookie" version of the more expensive EMS that are on the market but at only a fraction of the cost. Right?
I, personally, have never considered purchasing a standalone EMS first off because of the price of the software and secondly because I didn't want to damage my engine. But with this new ECUflash software, it's pretty user-friendly and if Big Al is going to create a package like this, IMHO, I think it'll be a thing of beauty.
I ordered my Tactrix cable yesterday (30 June) at about 0500. I received my cable in the mail today (1 July) at about 1200. I must say, that Mr. Colby Boles sure does know how to make a man smile. I'll be sending my stock ROM and Paypal payment of $49.99 this evening.
Almost there! 
I ordered my Tactrix Cable this morning and they said it'll take 3-5 business days. I, just like many of you, am anxious to get my E-flash.
By the looks of this through the mail kit, that seems to be a great idea. It sounds to me like a "rookie" version of the more expensive EMS that are on the market but at only a fraction of the cost. Right?
I, personally, have never considered purchasing a standalone EMS first off because of the price of the software and secondly because I didn't want to damage my engine. But with this new ECUflash software, it's pretty user-friendly and if Big Al is going to create a package like this, IMHO, I think it'll be a thing of beauty.
Almost there!
