Goin Nutz here...

 

Would it be possible to use the Red Needles with blue undeglow lighting? so at the Needle is red with a blue under glow sweeping past lit blue numbers and marks?

 

#1 looks hot

 

From what Justin from ImportCarPartsPlus.com has said, you need to shave off the red on the back of the needles and paint them white to get the blue color. My guess is that the white reflects the light coming from the underside of the base of the needle as it travels down the needle itself, so the red backing of the stock needles wouldn't reflect the light the same way white would and would probably give a purplish effect.

 

What if the needles were painted red up top, so they are red during the day time and the blue light shows through the clear bottom for a red/black looking needle with blue underglow at night?

That's what I meant.

 

Okay, here's what one might see at night:



This is for the white on black one. To achieve the blue, we'd apply a layer of blue filter behind the gauge face. If the backlight for the gauges can be switched off during the day (rewired to parking lights maybe). Then we'll see white during the day and blue at night.

 

I like these. Just gotta get them to make them for the EVO. Blue back lighting also.

 

the picture at nigt is great. I just bought the Bliz BLM gauges as well and that last picture looks like it would match prety good. keep me posted. I am very interested in the progress.

I also like the picture at the top of page 3 with the blue line and red at specific plaves. It looks great.

 

Ok Mister2zx3 you are officially BANNED from photochopping these gauges

The original #3 rocked... matched my Cobalt series too =P

 

Aww come on. Just throwing out ideas, heh. You know someone, somewhere likes emmm.

Everyone has there posts per page set differently so what is top of page 3?

Also would the Evolution VIII shine through? Is there a light behind there stock?

 

I would like to see a gauge cluster with the redline 7k at 12:00 and maybe 0rpm starting at say 7:00 with the lcd offset to the right... anyone what to try to photo chop that ?

 

The "Goin Nutz here..." one for day time and the "Okay, here's what one might see at night:" one for night.

that would be ideal....!!!

 

If there isn't a light behind the "Evolution VIII" part, I'd put one there. And the gauges will be designed to allow that.

 

You know, I think one of the biggest problem hindering the EL gauges is the fact that all those warning lights are integrated with the gauge face. At least that's what I think.

 

I love that last one, this design is genius, looks so high quality now. Someone go through and make these now.