i can not read a evo X. Help

Reply Subscribe

Thread Tools

Search this Thread

Feb 3, 2011 | 11:18 AM

#16

fostytou

EvoM Community Team

iTrader: (15)

Joined: Sep 2006

Posts: 3,143

Likes: 7

From: Aurora, IL

Quote:

Originally Posted by raulhp

Tephra, i have read your post about bench the ecu
https://www.evolutionm.net/forums/ev...h-process.html

The log on the ecuflash when i try to read is
[23:15:44.000] sending init sequence 1 (0001)
[23:15:47.218] sending init sequence 1 (0003)
[23:15:50.437] sending init sequence 1 (FFFF)
[23:15:53.140] no response to any known code
[23:15:53.140] interface close

Is that log taken from an attempted read during a bench? If not, get it on the bench, read the rom, then send it to him...

Feb 3, 2011 | 02:09 PM

#17

raulhp

Thread Starter

Newbie

Joined: Nov 2010

Posts: 29

Likes: 0

From: Spain

no, this is a the log when i try to read the OEM map with the tactrix cable with ecuflash

Feb 3, 2011 | 02:31 PM

#18

Golden

Evolved Member

iTrader: (1)

Joined: Nov 2009

Posts: 1,456

Likes: 0

From: Omaha, NE

Do you have the latest drivers for your OpenPort 2.0 cable along with the latest EcuFlash?

I've heard of Evo 8/9 guys removing a pin on the cable for some reason. Yours does still have all the pins, right?

Feb 3, 2011 | 05:31 PM

#19

tephra

EvoM Guru

iTrader: (6)

Joined: Feb 2007

Posts: 9,486

Likes: 67

From: Melbourne, Australia

HOLD ON

Are you selecting Mitsu CAN 2007+ ? When doing the read

Or are you selecting old Mitsu cars?

Feb 4, 2011 | 01:20 AM

#20

raulhp

Thread Starter

Newbie

Joined: Nov 2010

Posts: 29

Likes: 0

From: Spain

I installed the last version of ecu flash 1.43 and when it installs, the drivers were installed too

I have all the pins on my cable right now (version2.0)

Tephra, yes, i select Mitsu can vehicles... (better looking interface on the beta version)

it is very strange, because i read a CAN lancen 2.0 NA (143 Hp) car 3 months ago, I have had not the XML for this car, but i can read the map, then i got the XML and i tuned.

Feb 4, 2011 | 03:38 AM

#21

tephra

EvoM Guru

iTrader: (6)

Joined: Feb 2007

Posts: 9,486

Likes: 67

From: Melbourne, Australia

well its very strange..

bench it (ie remove from car) and send me the ROM for comparison vs a known stocker

Feb 4, 2011 | 09:59 AM

#22

fostytou

EvoM Community Team

iTrader: (15)

Joined: Sep 2006

Posts: 3,143

Likes: 7

From: Aurora, IL

Quote:

Originally Posted by Golden

I've heard of Evo 8/9 guys removing a pin on the cable for some reason. Yours does still have all the pins, right?

That is for ACD logging. No pins need to be removed on OP2.0 ever... it can dynamically turn pins on / off if I understand correctly.

Feb 5, 2011 | 05:27 AM

#23

raulhp

Thread Starter

Newbie

Joined: Nov 2010

Posts: 29

Likes: 0

From: Spain

finally i can read the ROM...the changes done were add to the ecuflash all the xml's for EVOX...
then i check and uncheck some options, open and close the program and VOILA

the rom is 53050006