clutch master cylinder

Reply Subscribe

Thread Tools

Search this Thread

Oct 24, 2009 | 10:41 PM

#61

.MM

Evolved Member

iTrader: (3)

Joined: Nov 2005

Posts: 508

Likes: 0

From: NH

Quote:

Originally Posted by Sicks

ok, got the car back tues. apparently a snap clip well.. snapped on a hose from vibration and it popped off causing me to lose the fluid.

so kudos to AMS

your reinforcement ring is still doing the job!

I dont know what to do...

Installed the Exedy Twin HD and 50 feet of driving later...my retaining ring popped off the clutch and my clutch master also broke.

I have the AMS ring and it did nothing.

My clutch pedal is pretty stiff with the Exedy Twin HD and it is slow to come back up after you press it. Not sure whats wrong.

Im afraid to drive it right now after we just fixed it...because it feels wrong to me and i dont want to brake the damn thing again...

Anyone experience the slow clutch pedal return?

Oct 24, 2009 | 10:51 PM

#62

TTP Engineering

Account Disabled

iTrader: (465)

Joined: May 2005

Posts: 8,824

Likes: 2

From: Central FL

We have seen the clip come in missing from the master and also the cylinder split. We have a Tilton 75 series master in stock which we will have available for anyone who wants it.

We installed the AMS ring and honestly it does not look like it will do anything. Where it breaks is not where the ring is located so I am at a loss as to what the AMS ring will actually prevent.

Oct 24, 2009 | 10:57 PM

#63

funks

Evolving Member

iTrader: (4)

Joined: Jul 2007

Posts: 488

Likes: 0

The following will most likely be the best solution for most X's out there with an aftermarket clutch. A plug and play unit made out of aluminum from SSP

Nov 13, 2009 | 12:56 AM

#64

funks

Evolving Member

iTrader: (4)

Joined: Jul 2007

Posts: 488

Likes: 0

Anybody enterprising individual out there going to CNC a tie down plate which stradles Tilton mounting point (allowing it to bolt on to the 4 holes) then machine an screwable end for the piston that looks like the above?

Dec 3, 2009 | 05:49 PM

#65

Frankiago

Evolved Member

iTrader: (2)

Joined: Feb 2009

Posts: 856

Likes: 1

From: IL

What is this?

http://www.japanparts.com/db/parts_d...=&SEARCH_page=

20100A = same old part that keeps failing after abuse, or new?

Dec 4, 2009 | 06:33 AM

#66

Scottr126

Evolved Member

iTrader: (62)

Joined: Apr 2006

Posts: 578

Likes: 0

20100A is the number for a clutch master cylinder in the Mitsubishi parts programs, it is the same number for the EVO 8 and 9. From looking around they havent made a new master cylinder yet.

The part number is MN100486

Quote:

Originally Posted by Frankiago

What is this?

http://www.japanparts.com/db/parts_d...=&SEARCH_page=

20100A = same old part that keeps failing after abuse, or new?

Dec 5, 2009 | 01:14 AM

#67

weap0n

Evolving Member

iTrader: (4)

Joined: Sep 2007

Posts: 396

Likes: 0

From: Australia

SSP have are now producing Stage 1 and Stage 2 direct replacement EVO X master cylinder upgrades.

Dec 6, 2009 | 07:59 AM

#68

SineEVO

Newbie

Joined: Dec 2008

Posts: 24

Likes: 0

From: Croatia

And, that is a must for any aftermarket clutch.

Jan 2, 2010 | 05:00 PM

#69

RedlineX79

Newbie

Joined: Jun 2008

Posts: 84

Likes: 0

From: Long Island, New York

*Bump*

This issue is about to be the deciding factor on whether I keep my evo or not. Any news on SSP's part coming out yet? I've tried to call back but haven't gotten through yet.

Anybody who has had the Evo 9 conversion done please post up your opinions. I'm seeing more than one report that the clutch does not feel so good after doing it.