1FastT2

iTrader: (1)

I'm currently running an AEM Intake and am preparing to and an FP Red in the next few weeks. Will I be able to adapt the AEM intake to the FP Red 3" intake? I like the AEM intake and would like to use it with this turbo if possible. This car is my DD and I perfer not using an open element filter. Any ideas?

Golden

iTrader: (1)

I ran into the same issue.

I purchased the Cobb 3" FP Inlet Tube and made a custom mount for my AEM MAF Housing. Then I slapped a cone filter on the end.

You can use the Cobb Inlet with the AEM just fine.

1FastT2

iTrader: (1)

Excellent, thanks for the reply, I'll have to give that a try.

Messidona

Golden.. dont you run into issues without the fan shroud?

Golden

iTrader: (1)

Nope. None at all. I've heard that it's because my filter is so far away from the fans.

D__

Looks good Golden. Can we just buy that AEM maf housing seperate?

Messidona

I had the same issue - haven't installed. I just sold the AEM and got a full 3 inch intake like ETS or AMS and get one of the couplers swapped to a 3 inch coupler. The alternative was to do what golden did and was to buy a the new COBB 3 inch inlet.

Golden

iTrader: (1)

I don't think so.

twinturbogreg

iTrader: (1)

So the Cobb FP inlet fit over the AEM MAF housing??

Evolessfornow

iTrader: (28)

I want to know as well.

saytheb

iTrader: (2)

The AEM turbo inlet pipe is tapered down to the stock turbo inlet size. At the top, it's 3". I took a 3" CF pipe from another exhaust, cut the AEM turbo inlet pipe and this other exhaust, then fit them both together. It was a very ghetto fix, but it worked..

I'd recommend just doing either as Golden mentioned or buying a true 3" intake.