Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Evox dies after injector and pimp install

Old Sep 25, 2016 | 09:13 AM
  #1  
Nastypants's Avatar
Thread Starter
Newbie
 
Joined: Sep 2016
Posts: 2
Likes: 0
From: Elmira, NY
Evox dies after injector and pimp install

Hey so I'm doing my build and did turbo, intake, down pipe, exhaust, injectors, pump intercooler, boost controller. Pretty much everything I could with out playing with internals.

After we did the injectors we started it ran fine for the most pArt with Id1000s that it would on a stock tune.

Then we did the pump it ran fine for about 1 min the mechanic gave it a little gas and it died out. Now it will start and run for about 5-10 seconds and die. Then won't start again for a bit.

Too much fuel on the tune flooding it or? Can anyone give me an idea.

If you're going to say do research or learn the car I'm going to tell you to choke your self. I'm asking for help that's why I'm here. Don't need smart bs. MERICA!
Reply
Old Sep 26, 2016 | 06:36 AM
  #2  
splattj's Avatar
Evolved Member
20 Year Member
Liked
iTrader: (2)
 
Joined: Jun 2002
Posts: 1,020
Likes: 113
From: Allendale, MI
Not the best first post......

I'm rather surprised the car idled at all for you with the ID1000s on a stock tune. You've almost doubled the injector size at that point. (550cc to 1000cc)

Scale your fuel maps and see if it gets any better before troubleshooting the hard parts.

If you don't want to do that, you can swap the stock injectors back to see if the pump is still causing issues.

And go do research, ya jerk. There are a few good fuel pump threads that talk about strategies to deal with overrun and pressure when going aftermarket. Since you didn't mention any of that I'm guessing the "mechanic" didn't do anything but swap pumps.
https://www.evolutionm.net/forums/ev...-pressure.html
Reply
Old Sep 26, 2016 | 07:25 AM
  #3  
Nastypants's Avatar
Thread Starter
Newbie
 
Joined: Sep 2016
Posts: 2
Likes: 0
From: Elmira, NY
Thanks, im grateful for the input.

I figured I already knew that it was dumping too Much fuel on a stock tune. But yeah I was honestly just looking for someone else's pov and other info. So once again i thank you.
Reply
Old Sep 26, 2016 | 09:53 AM
  #4  
jakgal04's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jan 2015
Posts: 551
Likes: 28
From: Ridley park
You can scale the injectors to get it to run, but ultimately you'll need the tune to make it run at its best, and safe.
Reply
Old Sep 26, 2016 | 10:03 AM
  #5  
LetsGetThisDone's Avatar
EvoM Guru
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2013
Posts: 15,973
Likes: 1,629
From: Las Vegas
So you literally changed every single bolt-on external part, didn't tune the car, and you're wondering why it won't run. hmm....
Reply
Old Sep 26, 2016 | 02:15 PM
  #6  
IzzyRS's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2011
Posts: 818
Likes: 22
From: Us
Originally Posted by letsgetthisdone
So you literally changed every single bolt-on external part, didn't tune the car, and you're wondering why it won't run. hmm....
Choke yourself! What is he supposed to do? Research and learn about his car?!?!
Reply
Old Sep 26, 2016 | 08:24 PM
  #7  
.M.'s Avatar
.M.
Evolved Member
 
Joined: Jun 2014
Posts: 899
Likes: 40
From: Chicago
^
Reply
Old Sep 27, 2016 | 08:24 AM
  #8  
Dross99_si's Avatar
Evolving Member
 
Joined: Feb 2015
Posts: 221
Likes: 11
From: Florida
You installed a pimp?!?! Don't get slapped.
LoL
Reply
Old Sep 27, 2016 | 08:24 AM
  #9  
Dross99_si's Avatar
Evolving Member
 
Joined: Feb 2015
Posts: 221
Likes: 11
From: Florida
Originally Posted by letsgetthisdone
so you literally changed every single bolt-on external part, didn't tune the car, and you're wondering why it won't run. Hmm....
this!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
supak111
Evo General
10
Mar 28, 2016 03:29 PM
scheides
Evo X Engine / Turbo / Drivetrain
17
Dec 16, 2010 02:07 PM
v-manracing
Evo Engine / Turbo / Drivetrain
15
Mar 12, 2009 05:15 PM
dashiet
Evo Engine / Turbo / Drivetrain
3
Sep 21, 2007 10:26 AM
NoTn41
Evo Engine / Turbo / Drivetrain
10
Sep 19, 2007 11:43 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:43 AM.