Does anyone have a write-up with pics for a LICP install without removing the front bumper? I've seen posts mention doing it by only removing the tray underneath.

 

Remove the front bumper it will make life way easier and its a really easy job to do

 

Removing the front bumper is the easiest way. its easy to remove it too. You can solo this job up until the point where you need to put the bumper back on.

 

After the bumper is off its very simple and easy to see what is needed to be done

 

I'm pretty sure you could have searched and found a DIY for this though. Just saying

 

^He probably got his answer seeing as this thread is about 4 months old. You can also install the LICP w/o removing the bumper on the x. Just remove the under tray on the drivers side and possibly removing your intake or airbox.

 

also when installing the new licp back, install the t-bolts inaway that they are pointed for easy removal if need be

 

^great point. This should help someone out!

 

im pretty sure taking the bumper off is mendatory especially on the MR. either way will make life a LOT easier.

 

^well on my GSR I didn't have to. I guess the mr may need to have the bumper removed.

 

seems easier to remove front bumper

 

I found it easier to remove the undertray on the drivers side and by removing the airbox.