Gauging interest: FQ400 Bumper Vent
Newbie
Joined: Sep 2012
Posts: 2
Likes: 0
From: Ma
i'm interested, its a good look and it certainly has the potential for some good benefits. The price point seems quite good. You should make sure if you are going to do this that a proper template is included for cutting and try to make it as install friendly as possible. That will garner a great deal of positive remarks and make this a real good seller.
You can get more information regarding becoming a vendor here:
E-mail is: auto.advertiser@internetbrands.com
Phone number: 888.879.0146
http://www.internetbrands.com/ib/advertising
It's great that you're taking the time to offer these for the community and as a site volunteer I would hate to see these get shelved or become unavailable due to lack of site sponsorship.
Keep in mind that if you wish to sell these or advertise these for sale through you, you will need to become a vendor on EvoM.
You can get more information regarding becoming a vendor here:
E-mail is: auto.advertiser@internetbrands.com
Phone number: 888.879.0146
http://www.internetbrands.com/ib/advertising
It's great that you're taking the time to offer these for the community and as a site volunteer I would hate to see these get shelved or become unavailable due to lack of site sponsorship.
You can get more information regarding becoming a vendor here:
E-mail is: auto.advertiser@internetbrands.com
Phone number: 888.879.0146
http://www.internetbrands.com/ib/advertising
It's great that you're taking the time to offer these for the community and as a site volunteer I would hate to see these get shelved or become unavailable due to lack of site sponsorship.
Last edited by Drew314; Nov 13, 2012 at 05:48 AM.
I understand your concern that I am going to swoop in at the last minute and tell everyone in this thread that is interested to PM me for deposits, but I assure you that will not be the case. I don't HAVE anything to sell yet. And I would not sell anything on this site without first having stock of said part and second, becoming a vendor. I appreciate the information to become a vendor. I will need it once I prototype and determine feasibility/cost effectiveness of the design.
The holiday and busy schedule is slowing this down ever so slightly, gents, but it is definitely moving forward. Once I get the proto made, and we can really determine if the part fabrication process meets the price point, I will update.
