JoNaH

iTrader: (4)

i been searching for a while now, i know in my evo MR i just unclip the top of the boot, remove the ash tray, pull that gray panel off then unscrew the boot from the bottom,

now on a evo 8? same thing? how do i take the boot off since it has no clip like the evo mr does (the button clip that is on the bottom of the shift knob). I really dont want to remove the entire console.

thanks

JoNaH

iTrader: (4)

no one?

JoNaH

iTrader: (4)

bump!!!!!!!!!!

dac001

iTrader: (3)

think you have to remove the entire console

JoNaH

iTrader: (4)

u sure? because that gray piece i think should come off? anyone else with a definate answer? thanks

JoNaH

iTrader: (4)

bump, there has to be one person on this forum that knows how to take this thing off

JoNaH

iTrader: (4)

bump

JoNaH

iTrader: (4)

anyone?????? 64 views and only 1 person to help

ixmrgg

iTrader: (13)

any of these help?

https://www.evolutionm.net/forums/ev...shiftboot.html

https://www.evolutionm.net/forums/ev...hift-boot.html

https://www.evolutionm.net/forums/04...hift-boot.html

http://www.redlinegoods.com/LancerOZ0203install.shtm

https://www.evolutionm.net/forums/ev...hift-boot.html

JoNaH

iTrader: (4)

you are amazing, thanks

BoostedFury

iTrader: (6)

I was just about to search for this, thanks.

Dragking2189

iTrader: (52)

To remove the shift boot you have to unscrew the shift knob one you've done that remove the trim plate which is the gray piece that holds the cigarette lighter and the ash tray, get a flathead and put it on the side and lift up the gray piece after, you will notice that the cigarette lighter is attached by some cables unplug the cables and you should able to take off the gray piece carefully . Once the gray piece is off , flip it over you will see 4 screws , get a a screwdriver and unscrew every single one . The shift boot should come right off the trim plate .