keep us posted im loving this **** lilazn64 you're the man

 

ok so im back from turbo trix. got couplers but gotta make sure they work. we just searched around the shop for some!! ughh i hope my oil feed line comes today. havnt gotten my good pics up yet, computer is in the workshop so its hard to use it with dirty hands.

ok so i got a bunch of letter emblems for cars and need to sell them. im thinking u know we all have our names we make on evom, why not put them on our cars and personalize them more!!!
give me some feedback on that or other options, ask ur moms lol.

 

neone got a battery relocation kit they want to sell?

 

just go find some 0 gauge wire.. (home depot) and go buy 2 new battery terminals (autozone) and go buy a marine style battery box from napa..
u should spend like.. 30 bucks.. if that..

o.. and go buy some 1 foot long all threads, and some bolts/washers.. and bolt it in the trunk..

 

oh im actually building a bracket to mount it where the evo one sits.

so today i set up the feed line, ( i got my lines ) put the new couplers on, tapped the oil pan which was extremely easy by the way. put the oil pan back on. bought 90 degree 5/8 hose for the oil return and a little breather filter. cant wait to work on it tomorrow night

 

well just about everything is done now, got the fan done and fuel pump....just the next thing is the gauges and vacuum lines and mounting the battery, fpr, and idk something else lol...gonna get powder coating done for my pipes and valve cover on thursday. after this im making a list of every little part that u would need to do this build and someone better get right on it since there will be a complete list of everything! i expect everyone to order the manifold from speedcorps and getter done.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

will be working on it again on friday night or something, got school till 9 pm tomorrow night and going to get stuff on thursday.

cya guys then

 

Good luck with the build bro! I've helped you as much as I could. I'll try and get an internet connection in Korea and figure out the time difference as well haha. I'll check in on the progress sometime next week hopefully.
Keep it up man! Starting to look good!

 

Oops double post...

 

http://www.facebook.com/photo.php?pi...f&id=199802623
Almost Complete

http://www.facebook.com/photo.php?pi...9&id=199802623
FAN MOUNTED IN FRONT

http://www.facebook.com/photo.php?pi...6&id=199802623
new walbro 255 on right side

http://www.facebook.com/photo.php?pi...8&id=199802623
sexay shot of the manifold

1. http://www.facebook.com/photo.php?pi...d&id=199802623
oil pan...use 5/8 pipe fitting with 1/2 npt tap and and 90 degree 5/8 hose from auto zone, cut the coils off the turbo oil return and clamp on hose. dril to the right of the x to not be in the way of the bolt.
2. http://www.facebook.com/photo.php?pi...e&id=199802623
Coils were not cut yet
3. http://www.facebook.com/photo.php?pi...1&id=199802623
pipe is on now

http://www.facebook.com/photo.php?pi...8&id=199802623
where the fuel pump sits, just take back seat off

http://www.facebook.com/photo.php?pi...d&id=199802623
this is where i mounted the fan controller

http://www.facebook.com/photo.php?pi...1&id=199802623
lilazn helping me out lol

http://www.facebook.com/photo.php?pi...4&id=199802623
very helpful

http://www.facebook.com/photo.php?pi...6&id=199802623
mounted intercooler, 2 bolts direct fit.

http://www.facebook.com/photo.php?pi...e&id=199802623
passenger side, oil feed line on top of oil filter ( which is removed now)

http://www.facebook.com/photo.php?pi...1&id=199802623
oil feed line attached. 4 feet steel braided with -4an fittings, 1/2 inch 90 to a -6an ??? to -4an

http://www.facebook.com/photo.php?pi...8&id=199802623
would u look at that, a direct fit!

http://www.facebook.com/photo.php?pi...1&id=199802623
Radiator fan mounting kit, ( autozone ) and perrin shorty attenae from www.speedcorps.com

 

nvm it works lol so did you finish up?

 

i will be updating when i have time with more elaborate wording and pics!! this is just a start

 

Nice build man I just got serious about boosting my 03 es so this is helping me tremendously!!! got a lead on some injectors right now and searching hard for a descent 16g.

 

I am definitely looking forward to reading that. Lol we need to talk. I am in the R&D Phase of my turbo build. But hope to see some videos of it running!

 

lots of videos to come when im doneeeee!!!!

 

1. http://www.facebook.com/photo.php?pi...3&id=199802623
Fuel pump cover bracket...need to cut out the shape of the rubber piece, ull see when u do it that it wont clip right so u have to modify it but not too much bc u want to it to still hold the filter and rubber piece on to the pump.
2. http://www.facebook.com/photo.php?pi...3&id=199802623

http://www.facebook.com/photo.php?pi...d&id=199802623
these are FREE replacement gaskits from forge for the adjustable wastegate. i got them in 2 days so that company is good!!!

http://www.facebook.com/photo.php?pi...e&id=199802623
me using a plasma cutter to cut the bracket for the battery

1. http://www.facebook.com/photo.php?pi...8&id=199802623
where the battery sits now
2. http://www.facebook.com/photo.php?pi...9&id=199802623