***ECUFlash Now For Base Lancers!***
ok so i used that scantech and managed to get the code from the car. I started a separate thread on it.
Now i have another problem. I open up ECU flash, and click the "read from ECU" button, but then it tells me "the interface cannot connect with hardware" with a bunch of numbers. Or something like that.
I know the cable is good cos i used it to get the CEL info. Does anyone know what else it could be?
Now i have another problem. I open up ECU flash, and click the "read from ECU" button, but then it tells me "the interface cannot connect with hardware" with a bunch of numbers. Or something like that.
I know the cable is good cos i used it to get the CEL info. Does anyone know what else it could be?
ok so i used that scantech and managed to get the code from the car. I started a separate thread on it.
Now i have another problem. I open up ECU flash, and click the "read from ECU" button, but then it tells me "the interface cannot connect with hardware" with a bunch of numbers. Or something like that.
I know the cable is good cos i used it to get the CEL info. Does anyone know what else it could be?
Now i have another problem. I open up ECU flash, and click the "read from ECU" button, but then it tells me "the interface cannot connect with hardware" with a bunch of numbers. Or something like that.
I know the cable is good cos i used it to get the CEL info. Does anyone know what else it could be?
Actually, the drivers are included with ECUFlash and will install automatically for the Tactrix cable. Or at least they should. I can't remember. It's been over a year since I installed mine.
^yeh the drivers all installed, and the Scantech software connects fine. Also ECU flash knows when the cable is plugged in. Basically the "connect to ecu" (or whatever) button doesn't become usable (is greyed out) until the cable is plugged in.
So i plug the cable in, the button lights up for me to be able to use it, but when i click it, it gives me the error.
In the list of cars that show up i don't see the lancer. And i went through each one of the ones listed one by one, and none of them worked.
So i plug the cable in, the button lights up for me to be able to use it, but when i click it, it gives me the error.
In the list of cars that show up i don't see the lancer. And i went through each one of the ones listed one by one, and none of them worked.
^yeh the drivers all installed, and the Scantech software connects fine. Also ECU flash knows when the cable is plugged in. Basically the "connect to ecu" (or whatever) button doesn't become usable (is greyed out) until the cable is plugged in.
So i plug the cable in, the button lights up for me to be able to use it, but when i click it, it gives me the error.
In the list of cars that show up i don't see the lancer. And i went through each one of the ones listed one by one, and none of them worked.
So i plug the cable in, the button lights up for me to be able to use it, but when i click it, it gives me the error.
In the list of cars that show up i don't see the lancer. And i went through each one of the ones listed one by one, and none of them worked.
http://www.box.net/index.php?rm=box_...ame=20sp04nxhu
EDIT: Changed sharing site. Should work now. Sorry guys!!
EDIT: Changed sharing site. Should work now. Sorry guys!!
Last edited by senate6268; Sep 23, 2007 at 06:44 PM.
ok got everything working, i got 1.29a from another website.
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
Last edited by crypto; Sep 23, 2007 at 01:45 PM.
ok got everything working, i got 1.29a from another website.
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
-Time!
Thread Starter
Evolved Member
iTrader: (115)
Joined: Dec 2003
Posts: 2,295
Likes: 4
From: Albuquerque, NM
Great to see it all working for you. Be sure you make a backup of that stock ROM before you go crazy tuning 
-Zack
-Zack
ok got everything working, i got 1.29a from another website.
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
That definition file worked and i can open up my rom and make changes. I will upload some screen shots and my .hex file in a few mins
update: .hex file Right Click, Save As
update: pic
^yeh i will save a copy of it. And i won't be tunning, senate is gonna help me out.
although i will start playing with that rom, and start learning how to do all this. i won't upload to the car though, i don't wanna blow anything up. lol
although i will start playing with that rom, and start learning how to do all this. i won't upload to the car though, i don't wanna blow anything up. lol