It's not reading my car right. My ROM ID is 88560021 but it doesn't pick it up right. Here's what I see.

 

Here's my file http://www.box.net/shared/1g1qgupamu

 

up

 

please

 

enjoy!

 

didn't work... I see the same thing as in the original picture...

 

Download the latest version of EcuFlash. here http://openecu.org/index.php?title=EcuFlash

save the 88560021.XML in Program Files/OpenECU/EcuFlash/Mitsubishi/Lancer/rommetadata

Leave only, 92290022, 98720010, lanceratbase, and 88560021 XML files. Close the folder...

try it, if x and y axis are not correct, follow these link

https://www.evolutionm.net/forums/sh...d.php?t=357840


the definition are work fine

 

ok I'll go try it now...

 

Same thing as the first pic... No tables... Is there a way to reset ecuflash or something. I think when I first used it I tried to make a def file and I may be stuck on that...

 

try it download EcuFlash 1.29a here http://www.box.net/shared/20sp04nxhu

maybe do not can read the ROM with these version, but you can edit your maps and load with the newest version

does not forget save the file xml in rommedata

Here is your maps

 

Ok I think I may have screwed something up then b/c it still isn't loading everything right...

 

i think no, try uninstall and re install EcuFlash but be sure to erase all old folder

sorry i can not help you, but i am from other country and i can not speak english, but your problem is your pc

 

Hey you've been doing pretty well so far I'll try using my other laptop too then...

 

thank you

ok, good luck

 

I think the problem is when I first started using ecuflash, I tried to make my own def file and I think it's stuck on that point.