My buddy might be getting the RRM intake manifold and we should be doing the install very soon. I looked around the site but only found bits of information here and there. Nothing very specific, nor nothing very complete. Could someone post me some sort of How to with/or without picture?

 

search, i know for a fact nmoney has one

 

It's really not very hard after you get the timing belt off. Some of the bolts (particularly on the underside of the runners) are hard to reach and sockets will not fit around due to clearances, but it's basically unbolt and rebolt. Bring something to catch all the coolant that's going to leak out when you undo the lines too. It can get messy really easily, and coolant sucks to clean up.

 

I actually never took off the timing belt cover

I made a write up about it, its in this forum just search. I didnt get it posted in the how to because i didnt have pictures! damn u pictures!

But Hobie is right, basically unbolt and bolt...Coolant can be a mess. Those lines are the two connected to the bottom of the throttlebody. Just look for the guide. And if u have any other specific questions or something u didnt understand. Ill be happy to help u out. Ive done the procedure twice. my best time is 3 hours! sw00t sw00t!

 

never heard anything about timing belt cover, but meh

starting early tomorrow, my tb and im along with bored fuel rail is going on. i'm hoping it will go on in less than 12 hours, but we'll see. i got all the tools and a fuel instruction sets, so i'm feeling pretty good about it. nmoney, you want me to take some pics as i do it so you can add them to your write up?

 

https://www.evolutionm.net/forums/sh...d.php?t=101074

 

Oh yeah u da man

yeah that would be great

 

Thanks

 

ahhhh crap, too late. i didn't bring my camera with me, so its a no go. but installation was absolutely cake, easier than most people make it out to be, so i doubt anyone needs pics. just label your crap, make some diagrams and notes, and your gravy.

i printed out the service manual pages along with nmoney's write up just in case, but i didn't even need it, its straight forward

 

glad to hear it went very well for you

good job!