ROAD/RACE- 08 Lancer Header DYNO!
Thread Starter
Former Sponsor
iTrader: (67)
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
PZEV makes way more than the FED. We only dynoed the FED but expect 50% more power out of the PZEV. PZEV is off the hook and make 15+ h.p. approx depending on what other mods you have.
ROAD/RACE
ROAD/RACE
i dragged a guy at Irwindale Speedway with every RRM part "v2 intake, pulley, axle back, and pzev header" and my times were slightly faster than his and i just have "WORKs tune and Injen SES"
i was thinkin of getting the header til it seems to put out no gains.. will you be making a v2 header??
i was thinkin of getting the header til it seems to put out no gains.. will you be making a v2 header??
Thread Starter
Former Sponsor
iTrader: (67)
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
The gains are proven. You know how the drags went with EVOLVE. he never dragged, crappy tires and was a tenth off you if I remember. Anyway dyno is proof on FED/CVT and FED is least restrictive stock so PZEV will give even more gains. Manual too will increase the results of power over a larger rpm range not just peak power. V1 is solid and gets great reviews from guys who have it so hard to comment on it if you do not have it.
ROAD/RACE
ROAD/RACE
Newbie
Joined: Oct 2008
Posts: 92
Likes: 0
From: New Jersey
recieved mine, its waiting in my room till the weekend, must i say it looks lovely!!! Nice and shiney and i also have the cell elimnator cause i hate SES LIGHTS!!!!!!!!!!! So im keeping my fingers crossed!!! Don't let me down RRM!! I have very very high hopes 
Newbie
Joined: Oct 2008
Posts: 92
Likes: 0
From: New Jersey
sorry dude their still isn't a dyi, i was going to make one but it was such a pain to do in teh first place that i just forgot to make a dyi (do it yoruself).
But i did it with out a life and it takes about 4hrs alone with the appropriate tools, if you do it in the day light maybe 3 hrs, i did it at night so lol plus it was like 38 outside lol.
you need a good amount of tools, def recommend a impact gun without it, good luck lol.
hot it goes well for you
But i did it with out a life and it takes about 4hrs alone with the appropriate tools, if you do it in the day light maybe 3 hrs, i did it at night so lol plus it was like 38 outside lol.
you need a good amount of tools, def recommend a impact gun without it, good luck lol.
hot it goes well for you
Evolving Member
Joined: May 2008
Posts: 437
Likes: 0
From: Phoenix, AZ
sorry dude their still isn't a dyi, i was going to make one but it was such a pain to do in teh first place that i just forgot to make a dyi (do it yoruself).
But i did it with out a life and it takes about 4hrs alone with the appropriate tools, if you do it in the day light maybe 3 hrs, i did it at night so lol plus it was like 38 outside lol.
you need a good amount of tools, def recommend a impact gun without it, good luck lol.
hot it goes well for you
But i did it with out a life and it takes about 4hrs alone with the appropriate tools, if you do it in the day light maybe 3 hrs, i did it at night so lol plus it was like 38 outside lol.
you need a good amount of tools, def recommend a impact gun without it, good luck lol.
hot it goes well for you
Newbie
Joined: Oct 2008
Posts: 92
Likes: 0
From: New Jersey
its 38 ft lbs tq on the header bolts, i have a tq wrench so i gave it 40 to be safe plus alil more push lol, but the bolt on teh middle bottome of the header, i could not fit the tq wrench so i just used a wrench with a breaker bar and tighten the **** out of it lol. But the bottom connection to the rest of the exhaust system, i used a impact gun and just blasted away till it was very tight .
any more questions??
.any more questions??