Notices
Lancer Engine Tech Discuss specs/changes to the engine from cams to fully balanced and blueprinted engines!

MOD GTS to be as fast as a Rally/Evo?

Thread Tools
 
Search this Thread
 
Old May 11, 2009 | 07:21 PM
  #1  
thinkazn's Avatar
Thread Starter
Newbie
 
Joined: Apr 2009
Posts: 3
Likes: 0
From: camp pendleton, ca
MOD GTS to be as fast as a Rally/Evo?

First Mitsubishi car in my family so no ones noes what to do. I jst bought the 09 GTS CVT in april and im jst wondering is there are ways to make it as fast as the Rallys or even the EVO without breaking the warranty?
Reply
Old May 11, 2009 | 07:23 PM
  #2  
LuDa's Avatar
Account Disabled
 
Joined: Feb 2008
Posts: 1,430
Likes: 1
From: Houston
1. use the search feature question has been asked a lot..just search around the forums.

2. NO theres no ways to do that at all
Reply
Old May 11, 2009 | 07:32 PM
  #3  
yitzac1990's Avatar
Evolved Member
iTrader: (16)
 
Joined: Oct 2007
Posts: 1,710
Likes: 0
From: Daytona Beach/Melbourne, Florida
haha agreed ^^
Reply
Old May 13, 2009 | 07:20 AM
  #4  
anbuzero's Avatar
Evolving Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 193
Likes: 0
From: North Jersey
buy a ralliart or evo. lancers are just slow cars to begin with.
Reply
Old May 13, 2009 | 07:30 AM
  #5  
turbotime's Avatar
Account Disabled
iTrader: (16)
 
Joined: Jan 2008
Posts: 635
Likes: 1
From: Ontario Canada
Being a 70hp difference between the gts and the ralliart, I doubt you could make that up with not voiding the warrenty. You can do a intake and exhaust which may bump you up 20hp if that.... That still leaves 50hp left, deff not gona happen with a 50hp ebay chip or any other means without breaking warranty.
Reply
Old May 13, 2009 | 12:51 PM
  #6  
glbg's Avatar
Newbie
 
Joined: Mar 2009
Posts: 57
Likes: 0
From: NJ
I emailed Rob from RRM before and he said it is possible to get upto to 200HP with their products w\o turbo.
Reply
Old May 13, 2009 | 12:56 PM
  #7  
EngRWW33's Avatar
Evolved Member
 
Joined: Jun 2008
Posts: 705
Likes: 1
From: Pittsburgh
^^I'm not going to bash on them, but you would be very lucky!!!

Plus, 200hp will not get you into ralliart/evo range. It just will not happen!!!

OP's answers have been answered. Good day.
Reply
Old May 13, 2009 | 01:15 PM
  #8  
glbg's Avatar
Newbie
 
Joined: Mar 2009
Posts: 57
Likes: 0
From: NJ
If it will be a long shot, set the bar lower or take the advise from others to get an RA or an EVO.
Reply
Old May 13, 2009 | 01:27 PM
  #9  
ambystom01's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2003
Posts: 15,634
Likes: 75
From: Canuckistan
Simple answer, not unless you have a massive budget. It would be cheaper to sell the car and buy a Ralliart or an Evo.
Reply
Old May 13, 2009 | 01:31 PM
  #10  
jRox's Avatar
Evolved Member
iTrader: (11)
 
Joined: Apr 2007
Posts: 1,498
Likes: 1
From: Union, NJ
Originally Posted by glbg
I emailed Rob from RRM before and he said it is possible to get upto to 200HP with their products w\o turbo.
LOL. At the crank? And which RRM products would contribute to this possible 200HP?

Last edited by jRox; May 13, 2009 at 01:35 PM.
Reply
Old May 13, 2009 | 01:40 PM
  #11  
Infamous_pt4's Avatar
Evolving Member
 
Joined: Nov 2007
Posts: 273
Likes: 0
From: Canadia
to be as fast as a stock ra you need a turbo kit from rrm,and a header back exhaust crank pulley and even then you wont be able to take a modded ra , having the cvt doesent help your chances either , if your goal is to be as fast as a ra then go for it everyone has dreams but to be asfast as a evo thats dreaming too high
Reply
Old May 13, 2009 | 02:06 PM
  #12  
glbg's Avatar
Newbie
 
Joined: Mar 2009
Posts: 57
Likes: 0
From: NJ
See email from Rob before:

From: Rob- ROAD/RACE <rob@roadracemotorsports.com>
Subject: Re: Message from Road Race Motorsports

All parts work together but header and timing box dynoed about 10 each, Piggy 8, intake 5, pulley 3, intake 8 and axelback about 5. These are on a a 2.0. On 2.4 expect a little more. That is about 50-60 h.p. more than the 145ish you started at.
Reply
Old May 13, 2009 | 02:11 PM
  #13  
cRc`22's Avatar
Evolved Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 579
Likes: 0
From: California.925
Originally Posted by glbg
See email from Rob before:

From: Rob- ROAD/RACE <rob@roadracemotorsports.com>
Subject: Re: Message from Road Race Motorsports

All parts work together but header and timing box dynoed about 10 each, Piggy 8, intake 5, pulley 3, intake 8 and axelback about 5. These are on a a 2.0. On 2.4 expect a little more. That is about 50-60 h.p. more than the 145ish you started at.
lol.
Reply
Old May 13, 2009 | 02:13 PM
  #14  
AhFuJai's Avatar
Evolving Member
iTrader: (4)
 
Joined: Nov 2007
Posts: 255
Likes: 0
From: Montreal, QC, Canada
wow....
Reply
Old May 13, 2009 | 02:13 PM
  #15  
ambystom01's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2003
Posts: 15,634
Likes: 75
From: Canuckistan
I'm sorry but that makes zero sense, different mods typically show gains in different areas, you can't simply add them up like that. Those numbers are also ridiculous and why the hell is intake stated twice with two different values?
Reply



All times are GMT -7. The time now is 10:55 AM.