Hey guys and gals, I just realized I am in the Ralliart page and know you guys don't use the 4G94 engine and use the larger version, but does anyone out there know what the TQ specs are for the valve cover on the 4G94 engine? I am changing the valvle cover gasket on my friends 03 Lancer ES and don't want to over TQ it....If anyone knows let me know........

Thanks....

 

Moved.

 

i think theirs a sticky somewhere about tq specs of the car.

 

 

^In/lbs, not ft/lbs! So basically just get it hand tight!

 

^ yea that's a VERY good point.

 

in the image it looks like the bolt says 30 plus or minus 4...if that diagram is not in ft. lbs then what is it? just want to know where to set the torque wrench...thanks for your help..

 

1ft =12" ie 12"/lbs = 1'/lbs

 

if you really wanna do it to spec. you need an inch pound torque wrench. otherwise
just hand tighten it.