4G93 intake manifold installed
#212
EvoM Guru
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: From SLO to San Jose
Posts: 1,827
Likes: 0
Received 0 Likes
on
0 Posts
??? mine is fully functional. were you skimming or something? the issue was that some intake manifolds didn't come with the CC vacuum port by the throttle body. the fix was either to make one or hook the CC up to the port that hooks up to the PCV valve or some other port on the manifold.
#214
ok... so if a Evo 8's manifold will fit ES's, technically... you could install a sheet metal intake from Weopon R, right. here is the link.....
http://www.stikiller.com/product.php...5e81ca3d49e28b
http://www.stikiller.com/product.php...5e81ca3d49e28b
#221
Evolving Member
iTrader: (9)
Join Date: Dec 2003
Location: Buffalo Grove, IL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
yes!! i just installed my bored out mirage manifold!!! nice gain on stock!!!! but i have a problem!! i don't have any cell or any leak but when i just idel, rpm drops down and car hesitate, i think i need to tighten the tb bolt, what tq you do you have to tq the tb bolt?
#223
Evolved Member
iTrader: (23)
Join Date: Aug 2002
Location: Lynnwood, WA
Posts: 2,204
Likes: 0
Received 0 Likes
on
0 Posts
Ok I'll give it to him, but only because I need to have my sig somewhere on this page:
Yes. It'll fit but only with modification. No we will not tell you what needs to be done
\/\/\/\/\/\/\/\/\/\/
Yes. It'll fit but only with modification. No we will not tell you what needs to be done
\/\/\/\/\/\/\/\/\/\/
#225
Newbie
Join Date: Jul 2006
Location: Western Australia
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
ok i've just put a 93 manifold in and now it sounds like a WRX (boxster sound) from 2nd gear onwards. does anyone have this problem.
all the leads are connected and no CEL no backfireing nothing to suspect somethings gone wrong just doesn't sound right
all the leads are connected and no CEL no backfireing nothing to suspect somethings gone wrong just doesn't sound right