https://www.evolutionm.net/forums/se...archid=2754692

Search for Adam's thread.

https://www.evolutionm.net/forums/sh...hlight=adamj39
The thread in his own word.

 

Mirage UDP Review:
https://www.evolutionm.net/forums/sh...98#post3223598

 

Ok went to the dealer today and found out the Diff casing is the same for the mirage, this would indicate we could use a LSD for a mirage!

 

whats the bolt pattern on the 97-o1 mirage?

 

Im not sure but the part number for the entire transmission is only one number diffrent. so we comparied the part numbers for the internals. it looks as if the gearing is slightly diffrent. yes the 97-01 mirage, i will compair the flywheel numbers tonight. if they are the same part number then yes the bolt pattern will be the same.

 

i bet the bolt pattern is the same And yes you can use the lsd from us.

 

Yes i have confimed with Mitsu. The part number for the flywheel is the same for US lancer and Mirage

 

So the bolt patter will be the same too!!! Hope all this information helps

 

If there are any other questions, about compadability please ask and I will cross the numbers for you, my dealer gave me the software to do it.

 

Flywheel: G92 = G93 = G94. TODA's flywheel for the G92 MIVEC was used in an 5g turbo'ed mirage long time ago.

G92 shares the same block w/ a G93 but smaller crank + rods combo.

 

Hey, you guys are awesome. Thanks for all the usefull info. Def. will help with my project.

 

I'm not sure if the latter lancer models have different flywheel. During the years of the 5g mirage, Mitsu constantly mucked around its emission. Mitsu seemed to muck all around the lancer nearly every progressing year.

 

just wanted to drop in a confirm that the Mirage flywheel does fit a lancer, i just installed a Fidanza aluminum flywheel for a 97-02 Mirage, havent had any problems with it, and was a lot less than what the lancer flywheels go for.

 

Thanks alot. Where did you buy it from?