local Pittsburgh Meet
I have exp with meth injection....Are you doing water/meth mix or straight meth. Running meth/water mix + pump gas, you should set your boost ard 25-26lbs. Thats 94 + mix. If your running straight meth\gas 27 or 28lbs of boost. My buddy ran straight meth\gas on his evo, but he had a GT35r turbo. He ran 28lbs of boost. On a 16g I believe that 25lbs is as efficient as the 16g can go. But it might be a lil lower than that. You should also go a shop that can tune your car on meth. Just because you add meth doesnt mean you will get all the horsepower that it can produce. Its in a good meth inj tune. Buschur tuned my buddy's meth kit and his car ripped. The next thing is your clutch. If you have a lot of mods plus meth, the stock clutch will be going bye bye soon. If you have any other questions, feel free to ask. Just remember what I said up top, he had a 35r thats why he was able to run 28lbs with 94oct + straight meth. NO WATER
Last edited by sti killer 187; Aug 2, 2006 at 12:33 PM.
Thanks for the info!!
I will most likely run 50/50 and I was really only looking to run 25psi on 93 or 94, and don't want to go with a bigger turbo yet. Looks like I should be able to do that. Yeah, I definately would have it tuned - and more than likely by Buschur.
I am VERY mechanically UNinclined when it comes to cars...I love to drive them, can put gas in, and...well that's about it
Did your buddy install his own kit or did he have it installed? If he had it installed - where?
Thanks for your help!!
-Denny
I will most likely run 50/50 and I was really only looking to run 25psi on 93 or 94, and don't want to go with a bigger turbo yet. Looks like I should be able to do that. Yeah, I definately would have it tuned - and more than likely by Buschur.
I am VERY mechanically UNinclined when it comes to cars...I love to drive them, can put gas in, and...well that's about it
Did your buddy install his own kit or did he have it installed? If he had it installed - where?Thanks for your help!!
-Denny
Originally Posted by dennyt4
Anyone local have a Walbro pump and install kit on hand for sale? Steve?
If not, any ideas where to buy one? I don't have time to get it shipped.
Thanks
If not, any ideas where to buy one? I don't have time to get it shipped.
Thanks
Mike Huml
Originally Posted by ozrally0303
so whos in tom just say something if not dont post like 15 people said they couldnt make it 2 weeks ago so whos def in for tom
i don't recall seeing you there either glenn.
ok, so i think my clutch is slipping. went to pass someone on the highway today, floored it in 4th and the car stuttered, rpms went up about 300 - 400 and then it caught. no good, no good.
i'm a little curious as to how it could be gone already though. i just flipped 14k miles and have only had a handful of drag launches.
i'm gonna try to check the fluid in a little bit here, see if maybe i am just low or something. but it looks like i will be needing a new clutch and flywheel sometime very soon.
oh well.


