the weather is suspect for this weekend. Rain forecasted on Friday & Monday...

 

Dont worry about boost adder or anything yet, actually send me your .hex because I am almost positive your scalings are going to be wrong by default. when I send it back just change main map WG duty % ONLY and play with that until you get it to your desired boost level logged via evoscan. once that is done send me a good log of boost and I will apply the closed loop correction control..I am not sure of any good threads but I had to go through it to get it working on V7, mostly due to incorrect scalings being selected by default.

 

Thanks Petey. I'll send you the ROM as soon as I get home from work today!

 

The lot is huge. If you look at the area by the monster, you see a little white dot by the trees...thats a van parks there.

 

Also the guy came and picked up the wheels and tires yesterday, sorry guys. I also got my new set of super JDM titeness, they are sitting in Mat's basement in Boston though.
18x9.5+30 My goal is 265/35/18!

 

No prob.. Dialing it in can take some time, it's like doing a whole other tune.. I spent an hour on chu's car to get it perfect and like 10 min doing the actual tuning..He gained like 40 hp with less peak boost over the MBC, but lost some tq, mostly due to lower boost at peak tq.

 

hopefully its not too hard or time consuming. I'm trying to get it dialed in prior to my race this weekend @ NJMP. If you had the time this week to do it I'd much rather just drive over there and pay you for a tune.

 

That only adds up to 1hr and 10 mins. My car hung out on the dyno for 4 hours. Why the heck was I there for over 4 hours? Putzing around with you, Craig, Tom, and Jay are such a waste of time!

 

so no word on my car dosent look like im going to make it sunday Hope fully soon! All this talk about ecu controlled boost makes me want to get a perrin

 

^ Can't imagine it would have been done and ready for this weekend anyways... Hopefully you'll hear from they soon.

 

Tim, no news in this case might actually be good news. I wouldn't worry about going back to the track if I were you anyways... thats what got you into this mess in the first place, lol.

 

Anyone have a pair of 15mm spacers I can borrow for the autox on 3/20? I have a set on order from JMF, but they won't be done in time. They make them per order, and I ordered too late last week to get them in time (they are waiting on material).

 

Aaron, I may have a set you can use. I had some new 20mm ones made up by JMF. THey are finished, but I haven't had a chance to pick them up yet. If I can grab them before this weekend you're welcome to use the 15mm spacers I have on my car currently.

 

Aaron, would 20mm work? I have a set of 20mm slip-on spacers you could borrow. I assume you have extended studs?

 

Thats what im hoping, Im done with drag racing wiht it just want to do auto x and maybe a track day this year.