Philadelphia's Classiest Drunkards
Evolved Member
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
this can be complicated.
the way i go from my place is PA turnpike to rt1 near langhorne to 95N to rt1 in new brunswick. you want to try to arrange to meet on 95 at rt1 (langhorne entrance ramp area)? or will that be too much of a project?
if you want, we could arrange to meet on the TP or 95.
this can be complicated.
if you want, we could arrange to meet on the TP or 95.
this can be complicated.
If you guys are going on the earlier side that may work for me... I'll get in touch with you Dan and let you know what my intentions are.
Are they going to have any of their custom trucks there? I wanna check some of those things out.
Robert, I'll be pm'ing you shortly.
Are they going to have any of their custom trucks there? I wanna check some of those things out.
Robert, I'll be pm'ing you shortly.
the way i go from my place is PA turnpike to rt1 near langhorne to 95N to rt1 in new brunswick. you want to try to arrange to meet on 95 at rt1 (langhorne entrance ramp area)? or will that be too much of a project?
if you want, we could arrange to meet on the TP or 95.
this can be complicated.
if you want, we could arrange to meet on the TP or 95.
this can be complicated.
get ur done!
You guys coming from Exton to KHC take 276 to 1 to 95 correct? If so, Oxford Valley Mall is right at 95 and Route 1, which would be a good meeting location for us!
http://maps.google.com/maps?f=q&sour...,0.090723&z=14
http://maps.google.com/maps?f=q&sour...,0.090723&z=14
Last edited by chu; Jun 3, 2010 at 07:05 AM.
Evolved Member
Joined: May 2008
Posts: 900
Likes: 1
From: Ashburn, VA
I think I had the wrong impression of what a "Dyno Day" is. I was actually thinking there would be tuning sessions, but turns out its just a "Get you numbers" sort of deal. I called KHC and they put me up for the 26th. So I guess no tune for me till then and I'll probably not be coming this Saturday irrespective of whether I get my Solenoid in the mail or not.
Evolved Member
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
You guys coming from Exton to KHC take 276 to 1 to 95 correct? If so, Oxford Valley Mall is right at 95 and Route 1, which would be a good meeting location for us!
http://maps.google.com/maps?f=q&sour...,0.090723&z=14
http://maps.google.com/maps?f=q&sour...,0.090723&z=14
how about we meet in the Regal Cinema parking lot at the Oxford Valley Mall at 10. We'll be there around 1030-1045ish.
you'd have to access the mall by 213E/Maple Avenue
Last edited by dek0026; Jun 3, 2010 at 09:22 AM.
I think I had the wrong impression of what a "Dyno Day" is. I was actually thinking there would be tuning sessions, but turns out its just a "Get you numbers" sort of deal. I called KHC and they put me up for the 26th. So I guess no tune for me till then and I'll probably not be coming this Saturday irrespective of whether I get my Solenoid in the mail or not.
Sounds good Dan!
Evolved Member
Joined: May 2008
Posts: 900
Likes: 1
From: Ashburn, VA
Technically, you are right. It is just a bunch of cars strapped on the dyno, and it spits out numbers. However, you're missing the gathering, conversations, and laughs...that's why I'm going. It's also an opportunity to meet new people, check out the shop that will be working on your car, and show support for your friends.
Rob, let me know what exact parts you'll need for the LICP. Do you need the clamps and the BOV hoses as well?
Evolving Member
Joined: May 2008
Posts: 165
Likes: 0
From: Philly
I have a Bosch universal as Josh said. What I did was cut off the bad sensor, and spliced it to the oem connector, so it remains a plug-in with the original harness. Knowing Josh, he prolly did the same. Very easy to do. There's a wiring diagram in the how-to section so you know how the wiring goes. Worked perfect since the day I did it. My rear o2 sensor was also spliced in, although it's an oem unit for a IX...difference connectors than an VIII
As for the 02 housing, I'm also running a Megan. It came with the IX turbo that I bought. I ported the hole on the inside out like everyone discuss so it flows better. Been working great so far. A cheap one is about $100 tops. If you have the loot, I like the Titek V2 housing...or as Modern Automotive Performance claims, is the MAP housing (...and I paraphrase...You'd be suprised how many parts are made in the same factory)
As for the 02 housing, I'm also running a Megan. It came with the IX turbo that I bought. I ported the hole on the inside out like everyone discuss so it flows better. Been working great so far. A cheap one is about $100 tops. If you have the loot, I like the Titek V2 housing...or as Modern Automotive Performance claims, is the MAP housing (...and I paraphrase...You'd be suprised how many parts are made in the same factory)