Almost looks like Mike.

 

It's just Kimi in a recce car correct?

 

I do believe it it Kimi, but im not sure what Citroen uses for a Recce car, i know that Ford uses a Volvo suv

 

It's a warning to the rest of the world that Americans may be driving the car.... ROFL I crack myself up!

 

This would be a better warning.



1) she's still using USPS
2) look at how frikin old she is!
3) hair net
4) Buick
5) old
6) voted for medicare overhaul... like she's putting anything into that cesspool

 

Its a nice parking job, pretty sure no one is going to steal her car while she is parked there.

 

^^ i dont think she has to worry about door dings from people parking next to her also lol

 

The tree seems to have boxed her in though

 

Aaron (JohnBradley) is looking for a friend details here: https://www.evolutionm.net/forums/no...wop-rally.html

 

Just put on upgraded lower intercooler pipes. Boost doenst build up like stock. It seems like it gradually builds up now instead of a "boost" and I im tuned at 26 psi and i only see it going to 24 , maybe 25 sometimes. Im 70% sure it could be a leak so I will retighten and adjust the clamps.

But I was just wondering if there was anything else I needed to do after installing them ; Like do I need to reset my Ecu or anything?

 

^^^ YOu got leaks. You should notice nothing but better response on a lower IC pipe.

 

^^^+1 Boost leak. Also, I'd suggest putting T-Bolt style clamps on all the connections. They sell them OTC at Napa, but you have to be sure you align the couplings correctly. You'll see the factory hoses are painted with a blue and a pink dot that align on the factory pipes to keep the hoses correctly aligned. If you have the one between the driver's side between the intercooler and the factory aluminum pipe that leads to the throttle body on backward, it'll leak, at least mine did. Just had to turn it around and realign it and my leak went away.

 

I currently have worm gear clamps on them. I re aligned and tightened all of them this morning. Holds boost fine now. I did order a set of t-bolt clamps from ETS and will be putting this on next week.

I was curious, is there any sort of product that i can put on the hose and the piping to help seal leaks? Like some sort of caulk or something?

 

i use a little spit to get a seal when hooking up piping.

 

Is your spit the quality of a pipe sealant? I must have some, how much for a small jar?