Extreme Tuners U.S. Evo Build
To the OP good luck with your ET venture. I know a thing or two about making a little bit of power with the 4g platform. Don’t let this guy bs you with reinventing the wheel. 1500hp+ stock block 4g63’s lol. Why not send your car to a known shop such as Buschur etc. then you will have your car in less then a year.
Yes I do have the data to show the 60-130mph at 2.79 if you must know. Here is the thing my car is deadly 60-130 that’s when it works. My ¼ mile times suck as the chassis is not sorted and I have never ran full power as of yet. I will be happy to run any of your friends cars 60-130 or ¼ mile, set it up and let me know when. Clearly the Evo does not have a chance running high speed runs against these cars but I will say I will molest them 60-130mph.
To the OP good luck with your ET venture. I know a thing or two about making a little bit of power with the 4g platform. Don’t let this guy bs you with reinventing the wheel. 1500hp+ stock block 4g63’s lol. Why not send your car to a known shop such as Buschur etc. then you will have your car in less then a year.
To the OP good luck with your ET venture. I know a thing or two about making a little bit of power with the 4g platform. Don’t let this guy bs you with reinventing the wheel. 1500hp+ stock block 4g63’s lol. Why not send your car to a known shop such as Buschur etc. then you will have your car in less then a year.
You know the R-Version Gallardo's are running that fast 60-130 too right? They also will do 130-180 in 3 seconds or less.
From a 60 roll I can assure you your Evo would be back an easy 10 cars by 200. You're forgetting many things, aero, lag, gearing, all of which you're lacking. Maybe it can compete 60-130, but a TTG is just starting to stretch its legs at that speed.
Racing those cars from a roll is completely different than many of you guys think. Just because the Evo can trap within 10mph does not mean it is going to be close, 10mph is HUGE at that speed, much more than a 110 vs 120mph car.
Also what makes you think your Evo even stands a chance? Turbo Busas, sprayed Busas, the fastest of street Supras, Omega GTR, etc. An R-Version Gallardo has never lost. Keeping up 60-130 means zilch when you're racing these kind of cars.
Last edited by HAHAV8; May 9, 2012 at 06:40 AM.
Joe's setup is an expensive project, all the turbo kit and the methanol fuel system are ready.
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.
Spyros
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.

Spyros
Joe's setup is an expensive project, all the turbo kit and the methanol fuel system are ready.
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.
Spyros
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.

Spyros
Joe's setup is an expensive project, all the turbo kit and the methanol fuel system are ready.
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.
Spyros
We built a special intake billet intake manifold for him, IC water cooler setup also ready.
Missing some parts of the engine setup and some trany parts.
Please let him finish the way he choose to go and give him a chance to prove what he pays when finish.
I promise from our side that will be something real good and quick.

Spyros
4 minutes agoSpyros Panopoulos
we have send 6-7 64mm units and 3 67mm to evo people in the forum"
These were t3 units from what he has said.
So any of you 10 guys that have the turbos already please stand up?
Last edited by khmerpimpin; May 9, 2012 at 10:38 AM.
We never sent free parts. We dont need to proove anything.
Thank you.
If you don't need to prove anything, why did you start the thread on this forum for highest hp 4g63? Then begin posting pictures of all these parts and builds , Dyno numbers! You obviously needed to prove something! You are probaly the only vendor that doesn't vend! I'm not paying 1k+ for cams that have no testing to my knowledge by any known shop. And I'm not paying 2k+ for a turbo that is in the same boat as the cams! All other known shops send out parts for beta testing to show real world unbiased results! Send the parts , I'll have them tested and if they work like you say, then I'll gladly pay the price. If they don't, I'll ship them back to you. Helk I'll cover the shipping fees both ways.
Graphiteevo9, def not coming at you! I just feel bad! I hope you get your car done and it's all that and a bag of chips! But over 1.5-2 years and still nothing from this company! I watch f1 and I have yet to see extreme tuners on any maclaren cars! Or even the pit crews outfits!
If you don't need to prove anything, why did you start the thread on this forum for highest hp 4g63? Then begin posting pictures of all these parts and builds , Dyno numbers! You obviously needed to prove something! You are probaly the only vendor that doesn't vend! I'm not paying 1k+ for cams that have no testing to my knowledge by any known shop. And I'm not paying 2k+ for a turbo that is in the same boat as the cams! All other known shops send out parts for beta testing to show real world unbiased results! Send the parts , I'll have them tested and if they work like you say, then I'll gladly pay the price. If they don't, I'll ship them back to you. Helk I'll cover the shipping fees both ways.
it also only takes the few big shops on this forum under 4 months to do a full build. why the hell is anyone waiting way over a year for a build on a 30k car?






