01 Mirage to Evo IV Conversion
#33
Evolving Member
Join Date: Sep 2005
Location: Residing in california for now
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Currently in NZ and plan to do the same when I go back to Cali. Would you reckon it would be easier to chop the front firewall and do a RHD conversion or source out the LHD dash?
#35
Ok, i sold my iX to move back to PR...
I want to build a iV back home... i need a source for the rear floor pan (i think we need to get them from Mitsu UK, but this will be kinda of impossible for me from PR, any other ideas?)
OP did you ever finish this sick build?
Thanks,
Joel
I want to build a iV back home... i need a source for the rear floor pan (i think we need to get them from Mitsu UK, but this will be kinda of impossible for me from PR, any other ideas?)
OP did you ever finish this sick build?
Thanks,
Joel
#37
I believe the rear floor pan fit from an E8 but im still to confirm that... if I can't, I will fabricate the driveshaft tunnel myself ... this might start this summer.
#38
Newbie
Thread Starter
Join Date: Nov 2011
Location: Jacksonville
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Ok, i sold my iX to move back to PR...
I want to build a iV back home... i need a source for the rear floor pan (i think we need to get them from Mitsu UK, but this will be kinda of impossible for me from PR, any other ideas?)
OP did you ever finish this sick build?
Thanks,
Joel
I want to build a iV back home... i need a source for the rear floor pan (i think we need to get them from Mitsu UK, but this will be kinda of impossible for me from PR, any other ideas?)
OP did you ever finish this sick build?
Thanks,
Joel
The issue with the Evo 8 pan is that the rear suspension cups are positioned differently to allow for the wider track that the Evo 5 and up have. Also the driveshaft tunnel and one of the driveshaft hangers are already on the Mirage, the only reason you need the rear pan is to clear the rear diff and have the proper mounting points for the rear subframe.
#39
I haven't finished this build just yet as a lot happened last year. I finally did source a rear floor pan from an Evo IV from Canada so this build should be completed in the next two months. With that said I'm fairly positive you can just import an Evo IV to PR as they aren't as strict there (I used to live in Luquillo).
The issue with the Evo 8 pan is that the rear suspension cups are positioned differently to allow for the wider track that the Evo 5 and up have. Also the driveshaft tunnel and one of the driveshaft hangers are already on the Mirage, the only reason you need the rear pan is to clear the rear diff and have the proper mounting points for the rear subframe.
The issue with the Evo 8 pan is that the rear suspension cups are positioned differently to allow for the wider track that the Evo 5 and up have. Also the driveshaft tunnel and one of the driveshaft hangers are already on the Mirage, the only reason you need the rear pan is to clear the rear diff and have the proper mounting points for the rear subframe.
can you give me the information where did you get your floor pan?
thanks bro
#42
Here is a side by side of my Nismo 350z and Evo 4 (minus the drive train)
Next I will be finishing up the interior so I can drive it and get some great gas mileage while I work on rebuilding the Evo motor and sourcing a rear floor pan to complete the drivetrain swap.[/QUOTE]
- super clean bro! im japanman1994 on mirageforums.net. im right at the same spot you are... looking for the rear floor. i have the body panels all on but still need the swap. i was gonna do RHD just to have that authentic feel to it.
anyhow, im SOOOO digging the GG paint1 i chose iconic white, but now im reconsidering after seeing yours!
Next I will be finishing up the interior so I can drive it and get some great gas mileage while I work on rebuilding the Evo motor and sourcing a rear floor pan to complete the drivetrain swap.[/QUOTE]
- super clean bro! im japanman1994 on mirageforums.net. im right at the same spot you are... looking for the rear floor. i have the body panels all on but still need the swap. i was gonna do RHD just to have that authentic feel to it.
anyhow, im SOOOO digging the GG paint1 i chose iconic white, but now im reconsidering after seeing yours!
#43
man I wish they weren't strict... too many ppl tried to import 4,5 and 6's... they won't let you register it for daily drive (you could import one *** a race car) plus ill have to pay massive amounts of money on taxes for it... just curious, how much a E4/5 can go for in Canada?
can you give me the information where did you get your floor pan?
thanks bro
can you give me the information where did you get your floor pan?
thanks bro