When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Evo GeneralDiscuss any generalized technical Evo related topics that may not fit into the other forums.
Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central
Looking for the part number for the RS ignition switch harness/lock cylinder harness. I keep getting the part number for the immobilizer key ring which is MR587889.
These other part numbers I found are unknown.
MR203094
MR329406 -- seems like an immobilizer key ring too.
Hi guys and girls , new here to the community. After looking up a few readings ,
its turns out out that I need to replace my acd pump located front driver side ( LHD ) , all my lights are on ; Tarmac , gravel , snow and also anti-lock
if anyone has one for sale or a source I can buy from please let me know,
im from Vancouver , British Columbia Canada
email is patrick_supra@hotmail.com
Anybody knows the part numbers for BOTH left and right side mirror glasses with blind spot edges? I noticed that my friends EU evo 9 has them and I have the ordinary "zoom" mirrors... See image bellow...
So I'm still looking for this mirror glass, please help me find the correct part number because everywhere I've looked and ordered, they got me the wrong one.
So I'm looking just for drivers side mirror glass with "dead spot" corner like shown on the above picture... Please help
My car had an aftermarket removable steering wheel when I bought it, I'm looking to go back to an OEM one.
I don't have the 8mm hex bolt that holds the wheel to the column, any chance someone knows the part# or the specs on that bolt? Also, #'s or info on the two bolts that hold the airbag module inside the steering wheel (left and right) would be very much appreciated. Thank you.
Looking to find the Part number for the JDM/EUDM (Right hand drive) Version of the shifter console.... The entire console itself... With the indentation of the ashtray... and the hole for the cigarette lighter... I purchased an aftermarket carbon fiber shift console plate (top portion) that was made for RHD evo... It has the ashtray and cigarette lighter on the opposite side of my US version evo ix console.. I had to cut mine to get the carbon top plate to fit.. Id like to go back now and locate the oem RHD console and install it properly.. Also.. the 2 little winglet plastic pieces that are located where the driver and passengers feet go that attach to this piece.... if i buy the RHD version will i need to order these 2 plastic pieces as well? or will my us version plastic pieces on left and right side fit the JDM console im looking to purchase?
The US version of the floor center shift console part number is : MR633547
Does anybody know the part number for the EU/JDM version of this console?
It has the ashtray imprint on the opposite side of the console.