Notices
Southeast Region Includes AL, FL, GA, NC, SC, TN, KY.

Fayetteville/Ft Bragg/Pope AFB -- TAKE TWO!!!

Thread Tools
 
Search this Thread
 
Old Nov 6, 2006 | 07:16 AM
  #136  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
oh yes... we all want a piece of the milky fresh pie .... and yes the 418 racing... i guess you are promoting turbodawg's business as well, but why not, he seems to be helpful and knows what he is doing as far as our cars are concerned... anyway, as i said im done with this childish crap, if you cant say sorry for the things you have said, so be it... i have said what i needed to and apologized for the things i should have... so im done with it. I went back and edited my posts and explained why... have fun owning me when you get back, i'd like to keep my daily driver a daily driver so i dont plan on copying the buschur setup. but good luck with your build, im sure it will be great. owning me will be hard though seeing as more then likely i will be at ft rucker , some of us do enjoy career progression.

back to important things, hey chris and sean, i do not have my phone with me today so if you want to call me to get together call me at work, 432 6215.... see you guys later

Last edited by bigric09; Nov 6, 2006 at 07:33 AM.
Reply
Old Nov 6, 2006 | 02:26 PM
  #137  
freshevo8's Avatar
Evolved Member
iTrader: (16)
 
Joined: Apr 2004
Posts: 649
Likes: 0
From: nc
Originally Posted by bigric09
oh yes... we all want a piece of the milky fresh pie .... and yes the 418 racing... i guess you are promoting turbodawg's business as well, but why not, he seems to be helpful and knows what he is doing as far as our cars are concerned... anyway, as i said im done with this childish crap, if you cant say sorry for the things you have said, so be it... i have said what i needed to and apologized for the things i should have... so im done with it. I went back and edited my posts and explained why... have fun owning me when you get back, i'd like to keep my daily driver a daily driver so i dont plan on copying the buschur setup. but good luck with your build, im sure it will be great. owning me will be hard though seeing as more then likely i will be at ft rucker , some of us do enjoy career progression.

back to important things, hey chris and sean, i do not have my phone with me today so if you want to call me to get together call me at work, 432 6215.... see you guys later
so we're saying what has been done is done? if so, let the games begin............ i WILL NOT APOLIGIZE FOR ANOTHING, as i have not done anothing wrong. good luck to you and your brothers'..............i'll let it at that..........once again..........i'm out..............

Last edited by freshevo8; Nov 6, 2006 at 11:16 PM.
Reply
Old Nov 6, 2006 | 02:36 PM
  #138  
freshevo8's Avatar
Evolved Member
iTrader: (16)
 
Joined: Apr 2004
Posts: 649
Likes: 0
From: nc
actually bigric09, u owe me an apology. u give me an apology and i'll leave it at that, nothing else said..........
Reply
Old Nov 6, 2006 | 07:16 PM
  #139  
Cirrusly Evolvd's Avatar
Thread Starter
Evolved Member
iTrader: (44)
 
Joined: Jan 2004
Posts: 1,584
Likes: 0
From: High-Plains Desert
Actually you two need to quit jacking this thread with B.S. and discuss it over PM. No one else wants to hear about it...
Reply
Old Nov 7, 2006 | 02:37 AM
  #140  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
Originally Posted by freshsrt-4
actually bigric09, u owe me an apology. u give me an apology and i'll leave it at that, nothing else said..........
as i told you, im done with discussing this baby ****.... i also asked you to not discuss it in this forum as it is making everyone else angry and serving no point... i have nothing to apologize to you for, you gave me some info/help on tuning, i didnt pass that to anyone, and havent used it on anyone else but me, and very slightly on brian which you said you didnt mind if i did.... you have said multiple terrible things about me and brian, posted information about me on this forum that isnt anyone's business but you decided to bring it out... thats what you need to apologize for, if you choose not to, dont... again, im done discussing this with you, you have my email, you know where to PM me.... i have grown up, maybe you should follow suit and take everyone elses feelings into consideration and quit trashing this thread
Reply
Old Nov 7, 2006 | 05:32 PM
  #141  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
hey sean... 2 things i need my damn tools tomorrow lol... call me in the morning or whenever before 1 and let me know where we can meet at... and i have your wideband at my house... what you need to do is get under your car... take a marker and put a circle on your downpipe where it meets your cat, about 3 inches back on the top of it pointing up so the 02 sensor will point thru the gap that is there... then take your car to tbc exhaust and have them weld an 02 bung in your pipe at that point so we can install it.... the best thing to do would be go to the autoshop on post, take your DP off, install the stock one temporarily... take your DP to tbc and have them weld the bung... tell them you know matt and i... and we sent you there... they will do it for like 20.... then bring it to my house and we can install it...

Last edited by bigric09; Nov 7, 2006 at 05:34 PM.
Reply
Old Nov 7, 2006 | 05:38 PM
  #142  
krazirob's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2006
Posts: 1,322
Likes: 1
From: Destin/Fort Walton Beach, FL
ok guys, im sure this short story will take our minds off the BS.

listen up cause it has a ugly beginning but a BEAUTIFUL ending..........................

im driving home tonight cruising at like 50mph down macridge st on bragg. then out of no where the guy in front of me runs over this HUGE AZZ wooden obstacle in the middle of the road, (mind you its been raining all day). well i had to make a quick second decision here and i didnt really want to run over this pile of **** and destroy something serious. SO...........i cut to the right and swerve away from it puttin me in the grass, as this happens i start to slide so i correct the steering to get myself back on the road. once i hit the road again then its over..........i start spinning out of control like 3 times, im tryin to cut the wheel in the direction of the spin so i can straighten up but the force wont let me, well finally i jerk the wheel to the left and i straighten out, but im facing the oppsite direction in which i was traveling so now the momentum has caused me to slide backwards and eventually i hit the fence in reverse. well after this i go and turn the car on and saw the engine light, im really angry at this point, i then pull away from the fence and get out to see the damage. the fence put some pretty strong little dents on my rear bumper and it and cracked my freakin spoiler putting a little hole in the lower right side of it.
Well the guy in front of me stops and with a furious attitude i walk down the street to throw all this crap off the road. well come to find out its one of those wooden frames they use at the range for holding up the targets (yeah that big azz **** was on the road). me and the guy are tryin to figure out why this was here. well i walk back down the road and guess who shows up???????????? freakin RANGE CONTROL (to all you military folks). hes like, i think one of my frames flew out of the truck. i commence yelling and screaming at this guy and the innocent bystander had to pull me back to calm me down. meanwhile im thinking.......................range control.....................government vehicle....................... government insurance...................yeah.................. this isnt so bad now is it. so i call the MP's and they come out and observe the damage and had me and this guy write sworn statements. the range control guy got a ticket for "failure to secureload". my damage consisted of the rear bumper, spoiler, front bumper and lower lip, intercooler was dented and the lower pipe was dented, (not yours ric dont worry, i hope you know what i was gettin at). and the engine light. so now my car will be new thanks to the govt since their employees cant secure their loads.

i just wanted to share this story since it has a happy ending and should put some smiles on your faces with maybe a chuckle.................lataz for now guys and now it appraising time..............cya this weekend
Reply
Old Nov 7, 2006 | 05:50 PM
  #143  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
i see where you are going with this... now what you need to do is just take a settlement... buy the jdm ix bumper, chris's wing, new front and licp ... and you are good.... lucky you in a sh1tty way
Reply
Old Nov 7, 2006 | 05:54 PM
  #144  
krazirob's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2006
Posts: 1,322
Likes: 1
From: Destin/Fort Walton Beach, FL


oh yeah!!!!!!!
Reply
Old Nov 7, 2006 | 05:57 PM
  #145  
ries's Avatar
Evolved Member
iTrader: (36)
 
Joined: Jun 2005
Posts: 1,572
Likes: 0
From: Yuma, AZ
congradulations......I think......lol

glad to hear things worked out for the best
Reply
Old Nov 7, 2006 | 05:58 PM
  #146  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
oh and also, this is something else to do, have your tires measured for flat spots... and get them replaced as well
Reply
Old Nov 7, 2006 | 06:10 PM
  #147  
krazirob's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2006
Posts: 1,322
Likes: 1
From: Destin/Fort Walton Beach, FL
Originally Posted by bigric09
oh and also, this is something else to do, have your tires measured for flat spots... and get them replaced as well
how would i measure them for flat spots?? just basically look for a flat spot or measure the tread all the way around??
Reply
Old Nov 7, 2006 | 06:11 PM
  #148  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
tell them when they do the estimate for damage that you want your tires measured... they will use a tire depth gauge and determine if there are flat spots... then if so, they will give you money to get new tires... the best part is, you dont actually have to get new tires, if they are driving fine, why bother, the point is that they will replace them ... i had to do it on my 03 when i went spinning... but mine needed it
Reply
Old Nov 7, 2006 | 06:14 PM
  #149  
cpdevo31's Avatar
Evolving Member
 
Joined: Jun 2005
Posts: 220
Likes: 0
From: Charleston, WV
find a good appraiser! lol
Reply
Old Nov 7, 2006 | 06:54 PM
  #150  
krazirob's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2006
Posts: 1,322
Likes: 1
From: Destin/Fort Walton Beach, FL
you best believe i using MITSUBISHI as one appraiser with their high azz rates, and i might use H&H too. tell them dont worry about the hook up on this one.........lol
Reply



All times are GMT -7. The time now is 10:09 PM.