hey thats a pretty cool product. You could put that between the pump and the meth tank. I wonder how much it can cool if there is constant flow.

In fact it might not even need to cool that quickly. If there is a decent amount of capacity for methanol, you might be able to hold a few seconds or a minuete or so worth of methanol, enough for one drag race for sure.

 

plus with the line coiled around the inside a few times the meth will have to travel through the line in the cool can so it will cool down the whole time its circulating thru the line in the cooler can, plus the ice/ dry ice or ice/water will cool the line down also....should work pretty well IMO

 

yea its should work for sure. Personally I have a lot of other stuff I want to try out so this will probably take a back seat for a while. Once I reach a point where 5% increase in cooling capacity is important, I'll give this a shot.

 

put some dry ice or liquid nitro(196 degrees Celsius) in a can, take some copper tube put it inside the tank, make the tube long enough to reach ur meth tank, and wrap it around the meth tank. simple diy.