Las Vegas Evo's
Originally Posted by gonzo
Long tuning day today. Had some minor problems with SAFCs. Two wires were switched wrong on three of them. Took awhile to get through that.
Rene put down some awesome numbers. His 91 tune put down 315 hp and 285 torque and his 100 tune put down 327 hp and 320 torque. He gain 80 hp and 60 ft lb torque on his 91 tune due to the car running really rich at redline. Thats the purpose of these tunes. To find the power and area under the curve.
Manny still has issues to work out. The stock airbox did help out enough to keep him on the safe side of things, but he still should have been a hell of alot more rich with zero settings. I'm sure when we get things worked out, his car will be a monster.
The 272i/262e cam setup works big time, as you can see by Rene's dyno numbers. I would like to see what straight 272's would do on a similar setup. Rene's 91 tune numbers are my 100 tune numbers. I have the opposite setup from his. So yeah.....
Once again, I would like to thank Alfred from Tuning Technologies and Matt from HPH for putting in some late hours at the dyno. It couldn't have happened without them.
Rene put down some awesome numbers. His 91 tune put down 315 hp and 285 torque and his 100 tune put down 327 hp and 320 torque. He gain 80 hp and 60 ft lb torque on his 91 tune due to the car running really rich at redline. Thats the purpose of these tunes. To find the power and area under the curve.
Manny still has issues to work out. The stock airbox did help out enough to keep him on the safe side of things, but he still should have been a hell of alot more rich with zero settings. I'm sure when we get things worked out, his car will be a monster.
The 272i/262e cam setup works big time, as you can see by Rene's dyno numbers. I would like to see what straight 272's would do on a similar setup. Rene's 91 tune numbers are my 100 tune numbers. I have the opposite setup from his. So yeah.....
Once again, I would like to thank Alfred from Tuning Technologies and Matt from HPH for putting in some late hours at the dyno. It couldn't have happened without them.
Originally Posted by gonzo
las vegas evo thread is our website. we just gotta face the facts on that
Originally Posted by vegasboy301
when someone posts up the whiteboard picture, that we had next to the computer at hph. you will see, compare my car, to other cars with the similar mods...
i had 304hp on 100 (rebel 100)
alex had 310hp on 100 (extreme 100)
(so what? cams and intercooler piping only add 6 hp?)
he has cams & intercooler piping over me... so either his car is slow, or my car is a freak. i never called my car a freak, sam and alex are calling it a freak.
justin, you have to look at all the numbers, with everything (mods)
a lot of them were the same... also, the whiteboard says what we all had done, and what was holding us back/ helping us. hopefully rene will post up a pic...
justin, just look at all the numbers. and hopefully youll see the light
i had 304hp on 100 (rebel 100)
alex had 310hp on 100 (extreme 100)
(so what? cams and intercooler piping only add 6 hp?)
he has cams & intercooler piping over me... so either his car is slow, or my car is a freak. i never called my car a freak, sam and alex are calling it a freak.
justin, you have to look at all the numbers, with everything (mods)
a lot of them were the same... also, the whiteboard says what we all had done, and what was holding us back/ helping us. hopefully rene will post up a pic...
justin, just look at all the numbers. and hopefully youll see the light
DAMN IT....FORGET I SAID ANYTHING. ill just keep this to myself, for my own comparison. N-E-WAYZ, what time is everyone meetin up at pilot to go to midnight mayhem. i dont work tomorrow. sam, u gonna bring out that monster and do a half-assed run to see what it does?????
Last edited by LostSoul Evo; Dec 2, 2005 at 02:58 AM.
P0300??
I just had my CHeck Engine light checked.. and I got the P0300 code.. I changed my Spark plugs recently.. is there anything else i need to do.. ie. Send it to the Dealer to get reflashed.. if so which dealer you reccomend??
