Notices
West Region Includes AZ, CA, HI, NV, UT.

Utah Evos

Thread Tools
 
Search this Thread
 
Old Apr 9, 2009 | 02:31 PM
  #22636  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by Evolution IVGSR
haha Maybe we should all go in on a group buy for Rotors
i need some so i'm in
Old Apr 9, 2009 | 02:35 PM
  #22637  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by subrwho
No, I never cut mine to fit the jdm rear. So it fits perfect on the stock rear bumper!
what is your exact exhaust set up? how do you like the sound? you would need my stock catback correct? what condition is it in? how many miles have you had it on? pics? i'm very interested.

i'll pm you my number so you can contact me that way if you so chose to make things easier
Old Apr 9, 2009 | 02:37 PM
  #22638  
UT_Evo's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2004
Posts: 3,601
Likes: 0
From: SL,UT
I was writing this last night, but then the GF came over... So that's why it's delayed.

Originally Posted by Evolution IVGSR
I personally only go to do it your self car washes or a Detail shop

Ya I like that I would rock a windshield banner of that

Sick I will have to save that on my Lap Top as a Reference to names of everyone since I am so bad with name
I wouldn't rock a windshield banner of anything, but I'd be find with a rear window banner... But stickers that are small enough to fit in the non-rolling rear door windows are always my fav

Do it yourself takes precious time, especially if it is cold outside. And places like Sonic where someone hand dries the car and cleans the inside etc are We always took the S and the Evo to a wash like that.

And I as well will need to save the list...

Originally Posted by ~BoOsTeR~
We close at 6 unless it's raining or snowing like cats and dogs and ya, we do the 48 hour for sure (same car.)

We're not brushless though, we are soft touch.
Hmm soft touch + black usually equals swirllies... But I'll give it a try at least once.

Originally Posted by Timmay81
anyone going to pro solo at the end of the month in wendover?
Originally Posted by sikwititevo9
what is pro solo?
You Evo owners and your mods with no use of them but going to get groceries and driving for a few seconds (aka quarter mile)

I might be going to help out a bit, doubt I'll run though. Auto-x is a bit more abusive to more expensive parts IMO than a track day.
Old Apr 9, 2009 | 02:40 PM
  #22639  
UT_Evo's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2004
Posts: 3,601
Likes: 0
From: SL,UT
Why do you guys need rotors? My stock ones were fine up until right before I sold the car... And they took 150x the abuse any of yours have seen. And no, don't try to argue it with me, it's true.

Subrwho, did you see my message/s about your stuff for sale?
Old Apr 9, 2009 | 02:50 PM
  #22640  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by bryant
Fairclough, can you still get on that CNC Machine? I need a new shift knob. The top clear thing on my OEM just came off.

Wesside, I think I just saw you on bangerter about an hour ago.
my shift knobs getting a little beat up too. I wasn't on Bangerter I was on I-15 just to downtown n back from N. Salt lake
Old Apr 9, 2009 | 02:52 PM
  #22641  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by Evolution IVGSR
haha Maybe we should all go in on a group buy for Rotors
Lets do this
Old Apr 9, 2009 | 02:52 PM
  #22642  
UT_Evo's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2004
Posts: 3,601
Likes: 0
From: SL,UT
Stickers first, rotors second!
Old Apr 9, 2009 | 02:54 PM
  #22643  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by UT_Evo
Why do you guys need rotors? My stock ones were fine up until right before I sold the car... And they took 150x the abuse any of yours have seen. And no, don't try to argue it with me, it's true.

Subrwho, did you see my message/s about your stuff for sale?
could be from drag racing, some of the 150+mph slow downs I think it's from not putting new pads on when I threw on the stoptech rotors up front
Old Apr 9, 2009 | 03:02 PM
  #22644  
UT_Evo's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2004
Posts: 3,601
Likes: 0
From: SL,UT
Originally Posted by wesside
could be from drag racing, some of the 150+mph slow downs I think it's from not putting new pads on when I threw on the stoptech rotors up front
Now I haven't seen much drag racing, but there is no way that after even a few simultaneous passes and fairly sudden stops that anyone has had brake temps over 500*F. But then again, almost all your cars are 2 years older than mine was, and after the 3 years of beating on mine they were certainly toast. Blue and purple with loads of minor cracks A few more track days on those DTC-70s and they probably would've shattered.
Old Apr 9, 2009 | 03:33 PM
  #22645  
Fairclough's Avatar
Evolving Member
iTrader: (27)
 
Joined: Jan 2008
Posts: 196
Likes: 0
From: South Jordan, UT
We have a couple of shift knob designs too choose from, I'll see if i can't take some pic's tomorrow and post them.
Old Apr 9, 2009 | 03:36 PM
  #22646  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by UT_Evo
Stickers first, rotors second!
Affirmative lets get stickers!!
Old Apr 9, 2009 | 03:51 PM
  #22647  
UT_Evo's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2004
Posts: 3,601
Likes: 0
From: SL,UT
Originally Posted by Fairclough
We have a couple of shift knob designs too choose from, I'll see if i can't take some pic's tomorrow and post them.
We need to figure out a time/day I can come in and we can lift my car up and take a look.

Originally Posted by wesside
Affirmative lets get stickers!!
Wes, get a job. Then be like me and post non-stop from there. I'm ashamed that you are probably just sitting around with your hand down your pants posting on EvoM from your phone
Old Apr 9, 2009 | 03:55 PM
  #22648  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
Originally Posted by UT_Evo

I wouldn't rock a windshield banner of anything, but I'd be find with a rear window banner... But stickers that are small enough to fit in the non-rolling rear door windows are always my fav

Do it yourself takes precious time, especially if it is cold outside. And places like Sonic where someone hand dries the car and cleans the inside etc are We always took the S and the Evo to a wash like that.

And I as well will need to save the list...

Hmm soft touch + black usually equals swirllies... But I'll give it a try at least once.


You Evo owners and your mods with no use of them but going to get groceries and driving for a few seconds (aka quarter mile)

I might be going to help out a bit, doubt I'll run though. Auto-x is a bit more abusive to more expensive parts IMO than a track day.
haha ya I am not serious about the banner i just want s nice one

I want to start up a Detail shop again I love it

Originally Posted by UT_Evo
Why do you guys need rotors? My stock ones were fine up until right before I sold the car... And they took 150x the abuse any of yours have seen. And no, don't try to argue it with me, it's true.

Subrwho, did you see my message/s about your stuff for sale?
haha it may be from quite a few top speed runs

Originally Posted by wesside
Lets do this
I am down as soon as I have money that is

Originally Posted by UT_Evo
Stickers first, rotors second!
haha Agreed man

Originally Posted by wesside
could be from drag racing, some of the 150+mph slow downs I think it's from not putting new pads on when I threw on the stoptech rotors up front
How did you know lol Ya I want Stoptech ones
Old Apr 9, 2009 | 05:26 PM
  #22649  
TwoFour's Avatar
Evolving Member
iTrader: (6)
 
Joined: Dec 2008
Posts: 298
Likes: 0
From: Salt Lake City
Originally Posted by Evolution IVGSR
haha Maybe we should all go in on a group buy for Rotors
Good idea, I have been looking at **************, getting them black rotors!
Old Apr 9, 2009 | 05:26 PM
  #22650  
TwoFour's Avatar
Evolving Member
iTrader: (6)
 
Joined: Dec 2008
Posts: 298
Likes: 0
From: Salt Lake City
Originally Posted by Timmay81
i wanna do my calipers this weekend. post up the exact paint and clear you used. and any pics of them after being done?
Red caliper paint sold at Checker, and engine enamel clear also sold at checker.



All times are GMT -7. The time now is 12:59 PM.