Utah Evos
Hey gear head, do you happen to have the code to disable lean spool for the 96940011 ecu? I don't just want to set the RPM to the same for enable and disable, I want to actually disable the entire process, but for some reason this computer is going REALLY slow and isn't letting me search any of the ecuflash forums 
Change Perephery1 bit 0.......1=enable/0=disable
So is there an easy way to use the new .xml file but copy all of the changes I made to the old one? Or do I have to go through everything and try and add it? Cuz that would be a giant pain
The immobilizer is disabled..I even send him my car to see if car would start. So I'm thinking same thing you are, either bad ecu, wrong year or maybe something with wiring?? I think Dallin said they put that ecu in another 05 and it started? I can't remember if he said that or not
Hey gear head, do you happen to have the code to disable lean spool for the 96940011 ecu? I don't just want to set the RPM to the same for enable and disable, I want to actually disable the entire process, but for some reason this computer is going REALLY slow and isn't letting me search any of the ecuflash forums
Ah, dang it I figured it was something like that. I do have ECUFlash 1.41, but i'm using the old 96940011.xml since I had all of my changes to it (jdm map sensor, 2 byte everything, ecu boost control, etc.), so it doesn't pull up all the periphery bits.
So is there an easy way to use the new .xml file but copy all of the changes I made to the old one? Or do I have to go through everything and try and add it? Cuz that would be a giant pain
So is there an easy way to use the new .xml file but copy all of the changes I made to the old one? Or do I have to go through everything and try and add it? Cuz that would be a giant pain
EDIT: you can also change prephery1 Hex from0x0009 to 0x0008
Last edited by gear head; Apr 16, 2009 at 01:12 PM.
I will probably switch to the other ecu file once I finish fine-tuning my car so all i have to do is copy over the timing/afr tables, but we'll see, I'm being reluctant to change
Ok, so if I'm understanding you right, I can use my old .xml as a "mod" xml, and still keep all the new features from the new .xml? Do I just rename the old .xml to something else, or do I have to load it in ecuflsh somehow? (Sorry for the n00b questions, haven't played with the new ecuflash much yet).
I will probably switch to the other ecu file once I finish fine-tuning my car so all i have to do is copy over the timing/afr tables, but we'll see, I'm being reluctant to change
I will probably switch to the other ecu file once I finish fine-tuning my car so all i have to do is copy over the timing/afr tables, but we'll see, I'm being reluctant to change
DELETE existing evo7base_20081101 & 96940011 xml files.
DROP the 3 xml files from the attatchment in the deleted files place
This Mod file has all patch definitions in it already...nothing needs to be added.
Awesome, thanks. Does that have the no cel patch for my wideband and everything too then? I'll have to download it when I get home, I'm on a work computer here. Thanks again for your help.
I just meant win because it is a blue haired chick with a subaru cloth around her... and... bouncing.
And I'm sure some of you have seen this... but I thought it was funny and just saw it.
http://www.collegehumor.com/video:1907543
And I'm sure some of you have seen this... but I thought it was funny and just saw it.
http://www.collegehumor.com/video:1907543