Notices
West Region Includes AZ, CA, HI, NV, UT.

Utah Evos

Thread Tools
 
Search this Thread
 
Old Sep 4, 2009 | 05:37 PM
  #28936  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by wesside
**** getting up @ 7am is early enough for me nowadays I used to get up @ 4:50 for years...glad I don't do that anymore
I used to have a job for 7 months that i had to be up at 4:30 everyday. That job blew bad

Originally Posted by EVILBLOODBROTHA
I talked to them about ordering it for me Just get the bigger GM Maf and Maf Translator then you can just blow out to the atmosphere, And it would be louder too Let me know what goes down if he does get it today just text me
how much does that run tho how much did they say for the kit? Which spacific kit was it

Originally Posted by Evolution IVGSR
Brick Oven Its a Restaurant in Provo that is Really good. I just started this week and it is kinda fun and really not bad. Be having a good first week and Tips are pretty good (so far)
glad you got a job man, bet it pays better then mine
Old Sep 4, 2009 | 05:38 PM
  #28937  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Oh just so you guys know logan (the guy that was with me at the antelope meet and greet) just bought a blue 04 today
Old Sep 4, 2009 | 05:53 PM
  #28938  
DIDYSIS's Avatar
Evolving Member
iTrader: (18)
 
Joined: Sep 2007
Posts: 467
Likes: 0
From: West Jordan, Utah
I have a large GM maf here is someone wants to buy one, 3.5inch, doing a blow thru does not really make anything louder. And an evo 9 has no problems running VTA, dont really need to do a blow thu and what.

Last edited by DIDYSIS; Sep 4, 2009 at 05:55 PM.
Old Sep 4, 2009 | 05:58 PM
  #28939  
DIDYSIS's Avatar
Evolving Member
iTrader: (18)
 
Joined: Sep 2007
Posts: 467
Likes: 0
From: West Jordan, Utah
oh I am running a blow thru if you have any questions
Old Sep 4, 2009 | 06:51 PM
  #28940  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by DIDYSIS
I have a large GM maf here is someone wants to buy one, 3.5inch, doing a blow thru does not really make anything louder. And an evo 9 has no problems running VTA, dont really need to do a blow thu and what.
Originally Posted by DIDYSIS
oh I am running a blow thru if you have any questions
Bobby was telling me to get one. I have an 8 which i'm putting an hks ssqv on. I was going to get a recir. kit for it but he was telling me to get a large GM maf instead. Info please and how much you selling it for?
Old Sep 4, 2009 | 06:53 PM
  #28941  
sikwititevo9's Avatar
Evolving Member
iTrader: (10)
 
Joined: Sep 2008
Posts: 145
Likes: 0
From: utah
Originally Posted by D-Mon3y69
Oh just so you guys know logan (the guy that was with me at the antelope meet and greet) just bought a blue 04 today
did he buy evans old evo? i know that one was for sale
Old Sep 4, 2009 | 06:56 PM
  #28942  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by sikwititevo9
did he buy evans old evo? i know that one was for sale
idk the previous owner is in jail... His parents bought it from him and had it sit for a year and then they decided to finally sell it. it gots low miles cause of that only 35k
Old Sep 4, 2009 | 07:15 PM
  #28943  
DIDYSIS's Avatar
Evolving Member
iTrader: (18)
 
Joined: Sep 2007
Posts: 467
Likes: 0
From: West Jordan, Utah
have you tried running it with out the recirc and see what happens? I have seen some Evo 8s where it seems to run fine. Blow thru will take lots of tuning.

Originally Posted by D-Mon3y69
Bobby was telling me to get one. I have an 8 which i'm putting an hks ssqv on. I was going to get a recir. kit for it but he was telling me to get a large GM maf instead. Info please and how much you selling it for?
Old Sep 4, 2009 | 07:28 PM
  #28944  
D-Mon3y69's Avatar
Evolved Member
iTrader: (47)
 
Joined: Sep 2008
Posts: 570
Likes: 1
From: Ogden, Utah
Originally Posted by DIDYSIS
have you tried running it with out the recirc and see what happens? I have seen some Evo 8s where it seems to run fine. Blow thru will take lots of tuning.
no not yet, i'll throw it on tomorrow probably when i take a break from my large amounts of homework ugh

but what all do you do for the blow thru? just curious
Old Sep 4, 2009 | 08:05 PM
  #28945  
EVILBLOODBROTHA's Avatar
Evolving Member
iTrader: (6)
 
Joined: May 2008
Posts: 455
Likes: 0
From: Classified
Originally Posted by Evolution IVGSR
Brick Oven Its a Restaurant in Provo that is Really good. I just started this week and it is kinda fun and really not bad. Be having a good first week and Tips are pretty good (so far)

Aslong as you like it thats all that matters What kind of food is it?


Originally Posted by D-Mon3y69
I used to have a job for 7 months that i had to be up at 4:30 everyday. That job blew bad



how much does that run tho how much did they say for the kit? Which spacific kit was it



glad you got a job man, bet it pays better then mine

You would just have to call them. Go to MAP and search keyword MAf it will bring up the translator and gm maf. Thats just what I was told you have to do. To run the BOV to the atmosphere and run right.



Originally Posted by D-Mon3y69
idk the previous owner is in jail... His parents bought it from him and had it sit for a year and then they decided to finally sell it. it gots low miles cause of that only 35k

Is he going to get a profile now
Old Sep 4, 2009 | 08:10 PM
  #28946  
EVILBLOODBROTHA's Avatar
Evolving Member
iTrader: (6)
 
Joined: May 2008
Posts: 455
Likes: 0
From: Classified
Hey Dallin I seen a pic of your engine today, And I noticed that you dont have your maf sensor. How to you make it so You can run like that? I want to make a cold air intake for mine. And that would be hard with the maf on That and I just dont want it on anyway
Old Sep 4, 2009 | 08:22 PM
  #28947  
gear head's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2005
Posts: 333
Likes: 0
From: Utah
Originally Posted by DIDYSIS
have you tried running it with out the recirc and see what happens? I have seen some Evo 8s where it seems to run fine. Blow thru will take lots of tuning.
Yes you can vent to atmos, however it ****s up the fuel trims & causes poor drivability. It is possible to tune around it, but the results are second-rate at best...just because you can do something doesn't make it right
Old Sep 4, 2009 | 08:34 PM
  #28948  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
Originally Posted by D-Mon3y69
glad you got a job man, bet it pays better then mine
Ya its good to have something that makes money for me even tho its not a ton something is better than nothing right now in are time and economy right now

Originally Posted by EVILBLOODBROTHA
Aslong as you like it thats all that matters What kind of food is it?
Ya well its something for now and I love the food

Its a gourmet pizza and pasta place really good food and they make there own brand of Root Beer that is good

Originally Posted by EVILBLOODBROTHA
Hey Dallin I seen a pic of your engine today, And I noticed that you dont have your maf sensor. How to you make it so You can run like that? I want to make a cold air intake for mine. And that would be hard with the maf on That and I just dont want it on anyway
haha AEM EMS That is what I use to have but I want to make my car more of a DD than a race car now so a more simple setup now is what I am thinking
Old Sep 4, 2009 | 08:40 PM
  #28949  
DIDYSIS's Avatar
Evolving Member
iTrader: (18)
 
Joined: Sep 2007
Posts: 467
Likes: 0
From: West Jordan, Utah
ya I know, but really it wont hurt your car or do anything bad, worse is that it will have stalling issues at idle.


Originally Posted by gear head
Yes you can vent to atmos, however it ****s up the fuel trims & causes poor drivability. It is possible to tune around it, but the results are second-rate at best...just because you can do something doesn't make it right
Old Sep 4, 2009 | 08:42 PM
  #28950  
DIDYSIS's Avatar
Evolving Member
iTrader: (18)
 
Joined: Sep 2007
Posts: 467
Likes: 0
From: West Jordan, Utah
Anyone got anything going on Tonight??



All times are GMT -7. The time now is 09:15 AM.