Utah Evos
Originally Posted by UT_Evo
I need like a REALLY big
face... that's funny Jeremy, and I don't even have to say it... anyone know of places I can get an SA rated helmet?
Yo UT ... If you're running the stock Brembos and haven't upgraded ... changing out pads is a matter, of:
1.) Pushing in the leaf spring that holds the pads in and the pins in place.
2.) Sucking out the lower pin.
3.) Sucking out the upper pin.
4.) Take the leaf spring out, and pull the pads out. If you're smart, you can put a little leverage on the pads before they come out on a non-slip area and push the pistons in without getting a tool to do it.
5.) Put in new pads and reverse the process of getting the leaf spring in and the pins back in.
Brembos = super easy pad replacement ... and with some speed bleeders = super easy bleeding.
Good Luck if you do it yourself,
jcnel.
1.) Pushing in the leaf spring that holds the pads in and the pins in place.
2.) Sucking out the lower pin.
3.) Sucking out the upper pin.
4.) Take the leaf spring out, and pull the pads out. If you're smart, you can put a little leverage on the pads before they come out on a non-slip area and push the pistons in without getting a tool to do it.
5.) Put in new pads and reverse the process of getting the leaf spring in and the pins back in.
Brembos = super easy pad replacement ... and with some speed bleeders = super easy bleeding.
Good Luck if you do it yourself,
jcnel.
ROFLMAO ... everybody likes to abuse monkey boy Jake! 
JID, crappy job on the exhaust ... it's not even straight.
Ray, do you have some helmets Jake and I can borrow for the weekend? Our helmets are in the race trailer with the S2000 in Cali.
That's why we're looking to pick up some SA rated helmets .... like tomorrow.

JID, crappy job on the exhaust ... it's not even straight.
Ray, do you have some helmets Jake and I can borrow for the weekend? Our helmets are in the race trailer with the S2000 in Cali.
That's why we're looking to pick up some SA rated helmets .... like tomorrow.
Originally Posted by scott88vr6
The only thing Jake has ever done by himself is put gas in the car and put duct tape on the steering column
and even then he had some help 
and even then he had some help 
j
I failed putting gas in one time...
And Ray, I'll call you when I'm done at Modern, it shouldn't take them too long to do everything... Oh, and it's not a big deal at all that you couldn't fit me in today, I could tell you were REALLY stressed and busy too. I was just coming in rather than calling.
And Ray, I'll call you when I'm done at Modern, it shouldn't take them too long to do everything... Oh, and it's not a big deal at all that you couldn't fit me in today, I could tell you were REALLY stressed and busy too. I was just coming in rather than calling.
Originally Posted by UT_Evo
flame war, from what?
I was also thinking I should have used that delay on the last post



