Notices
04-06 Ralliart Engine/Drivetrain (no forced induction)

tranny rebuild questions

Thread Tools
 
Search this Thread
 
Old Feb 10, 2012 | 05:53 PM
  #1  
RallyartRob's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Mar 2011
Posts: 492
Likes: 0
From: Ontario
tranny rebuild questions

i know your all goona say go searching but i tried i never find what im looking for when i know its on here.

im trying to decide what parts i need to replace in my rebuild, im already doing all synchros, 1/2 and 3/4 selectors all bearings and all seals im trying to figure out if i need to replace the bearing sleeves that the needle bearings under the gears run on anyone help?? mainly cranswick cause ive been asking u lots lol.

Thanks to anyone for advice
Reply
Old Feb 10, 2012 | 08:44 PM
  #2  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
i replied via text message

if anyone else has anything to add, feel free...
Reply
Old Feb 11, 2012 | 05:13 PM
  #3  
RallyartRob's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Mar 2011
Posts: 492
Likes: 0
From: Ontario
so i ordered 6 synchros, all bearings, all snap rings, 1/2 and 3/4 selectors since the 2nd and 3rd gear sides where worn down, all seals but i didnt order sleeves and needle bearings if anyone still has something to add let me know, the total came to about 1200 shipped including my water pump and full timing/balance belt and pulleys and a hydraulic tensioner
Reply
Old Feb 12, 2012 | 04:49 AM
  #4  
lanzerralliart's Avatar
EvoM Super Moderator
iTrader: (15)
 
Joined: Apr 2006
Posts: 3,347
Likes: 4
From: South USA
Can u post up the part numbers ?

I would like to do a rebuild later as well. About how much are you actually rebuilding, like just the problem areas, or more of a full rebuild?
Reply
Old Feb 12, 2012 | 11:29 AM
  #5  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
he's doing a lot...much more than i did...i only addressed the "problem areas" when i did mine...
Reply
Old Feb 25, 2012 | 01:21 PM
  #6  
RallyartRob's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Mar 2011
Posts: 492
Likes: 0
From: Ontario
Originally Posted by lanzerralliart
Can u post up the part numbers ?

I would like to do a rebuild later as well. About how much are you actually rebuilding, like just the problem areas, or more of a full rebuild?
i know this is late but my total came to 1200 shipped from mitsubishi parts.net including shipping water pump hydraulic tensioner and timing belt nad pulleys.

as for tranny i replaced all bearings except the needle under the gears, i did all synhros, 1/2 and 3/4 selector and all snap rings and seals here a list with prices fro that sight i said above


1300A066 : 1 : $150.16 (water pump)
MR994968 : 1 : $46.54 ( T belt?)
MR984375 : 1 : $112.17 (Hyd tencioenr)
MN137247 : 1 : $36.46 ( balance stuff))
MD352473 : 1 : $39.89 ( balance stuff))
MR984778 : 1 : $24.50 ( balance stuff))
MD747279 : 1 : $6.73 (Bearings down to the next arrow)
MN132370 : 1 : $10.18
MD741818 : 1 : $6.76
MD746157 : 1 : $5.08 (Bearigns ^^^^^^^^^^^^^)
MD746710 : 1 : $1.73 (I think these were the rings and seals goign down)
MD745804 : 1 : $1.24
MD747313 : 1 : $1.89
MD746567 : 1 : $1.82
MD706538 : 1 : $4.99
MD746709 : 1 : $1.73
MD748019 : 1 : $2.09
MD748128 : 1 : $3.56 ( Rings selas ^^^^^^)
MD747707 : 1 : $25.49
MD747740 : 1 : $26.58
2526A001 : 1 : $23.55
MD717670 : 1 : $14.97
2551A011 : 2 : $68.26 : 136.51 (Synchros ??)
MR581389 : 2 : $3.21 : 6.42
MN168937 : 2 : $31.48 : 62.96 (Synchros ??)
MR581383 : 4 : $3.04 : 12.14
MN168936 : 1 : $34.73 (Synchros ??)
MR581382 : 1 : $28.39 (Synchros ??)
MR581380 : 1 : $67.70 (Synchros ??)
MR581381 : 1 : $45.79 (Synchros ??)
MD710663 : 2 : $25.79 : 51.59 (Diff bearigns)

-----------------------
Subtotal:$994.38
Shipping:$208.82
Tax:$0.00
Total:$1,203.20

some of those are probably wrong dont remember what they all were sorry
Reply
Old Feb 25, 2012 | 01:39 PM
  #7  
roblaza's Avatar
Evolved Member
iTrader: (22)
 
Joined: Jun 2009
Posts: 839
Likes: 0
From: Barrie, ON
I'm soo glad my trans was done under warranty lmao
Reply
Old Feb 25, 2012 | 01:52 PM
  #8  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
lol, should last a while longer now, good stuff Rob (white car)

and you're lucky Rob (red car), i tried belleville, mid-toronto, cambridge, and barrie mitsu dealers, and they all told me if it was synchro's they weren't covered...but they would obviously charge me for pulling the tranny and taking it apart, and wouldn't put it back together unless they fixed it and i paid for the entire job...no thanks...
Reply
Old Feb 25, 2012 | 02:06 PM
  #9  
roblaza's Avatar
Evolved Member
iTrader: (22)
 
Joined: Jun 2009
Posts: 839
Likes: 0
From: Barrie, ON
That's why while my car was under warranty I only took it to Newmarket Mitsu. They're attached to the Volvo dealer and owned by the same guy, so I ended up getting a 2010 s40 for a loaner for 2 weeks while the car was on the hoist waiting for parts. Lol
Reply
Old Feb 25, 2012 | 04:06 PM
  #10  
RallyartRob's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Mar 2011
Posts: 492
Likes: 0
From: Ontario
Originally Posted by roblaza
That's why while my car was under warranty I only took it to Newmarket Mitsu. They're attached to the Volvo dealer and owned by the same guy, so I ended up getting a 2010 s40 for a loaner for 2 weeks while the car was on the hoist waiting for parts. Lol
helps if you still have warranty :P, my probelm turned out to be my selector, 2nd was rounded and 3 would be next also my 2nd gear is abit rounded on a few teeth so im goona try cleaning it myself if not order a new one for 100 shipped
Reply
Old Mar 2, 2012 | 04:21 PM
  #11  
RallyartRob's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Mar 2011
Posts: 492
Likes: 0
From: Ontario
first off that list i posted seems different then the one that came with the actual parts so dont quote me on those lol i have a screen shot of my order from before i placed the order if anyone wants.

Also dumb me only ordered 1 drive axle diff oil seal....darn, its a pain because ASA shows them coming as a pair no i got to go to stealer ship and try to find one for hopefully this week
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeg5263
Lancer Tranny/Drivetrain Tech
1
Feb 16, 2016 09:24 PM
EvowagonIX
Evo Engine / Turbo / Drivetrain
6
Jan 27, 2016 07:18 AM
ReivaXVrai2
Evo Engine / Turbo / Drivetrain
6
Apr 21, 2015 10:21 AM
aggieEVO
Evo General
3
Aug 6, 2014 07:42 AM
domantas
For Sale/WTB - Engine / Drivetrain / Power
11
May 14, 2010 07:43 PM




All times are GMT -7. The time now is 01:12 AM.