Evolved Member
Quote:
thanks.Originally Posted by mrfred
Changing the hex or changing the bit values does exactly the same thing, so only the hex or the bits need to be changed.
Evolving Member
Quote:
In my case, I suspect that it's the 5th gear syncro assembly.
issued a TSB stating that under light loads it throws harmonics in the 6khz range, the same range as the knock sensor detects knock....
Roger that. I had the same issues. I am essentially bone stock and have thrown a P0300. Use to happen under light loads (typical cruising speeds). No chucking or anything when the code is thrown. Originally Posted by chrisw
When the car is chucking the p0300 it's in closed loop, so the ECU is actively controlling the AFR's. The P0300 typically happened with large jumps in timing, and even after smoothing those values, you only reduce the tendancy.In my case, I suspect that it's the 5th gear syncro assembly.
issued a TSB stating that under light loads it throws harmonics in the 6khz range, the same range as the knock sensor detects knock....
Hopefully this fix helps me out.
black E
Evolved Member
close
Today
- Join DateMar 2007
- LocationBoca Raton FL
- Posts:545
-
iTrader Positive Feedback100
-
iTrader Feedback Score(77)
-
Likes:185
-
Liked:45 Times in 24 Posts
i added this to my XML but it dose not come up in ecuflash...
what am i doing wrong?! i added the defenitions on the link in the first post...
what am i doing wrong?! i added the defenitions on the link in the first post...
Newbie
Just curious has anybody experienced any issues with their 2 stage knock CEL no longer coming on after this patch? I have Ver 1.29 and added the code and changed the hex value but now it seems my CEL no longer flashes when I hit know. Just curious.
black E
Evolved Member
close
Today
- Join DateMar 2007
- LocationBoca Raton FL
- Posts:545
-
iTrader Positive Feedback100
-
iTrader Feedback Score(77)
-
Likes:185
-
Liked:45 Times in 24 Posts
Quote:
yes i did!Originally Posted by Steiner
Did you watch OneillEvo's video?
Evolving Member
Quote:
Which EcuFlash version do you have? At first I did not see the new table but upon closer inspection I found them.Originally Posted by black E
yes i did!
Evolving Member
Wow. Interesting.
Make sure you editing the correct ROM ID. At the beginning of the video I show how to identify what your ROM ID is. Once you have that edit and save the xml with the same ID.
If your still doing that and nothing comes up then I would have to look further into the situation.
Make sure you editing the correct ROM ID. At the beginning of the video I show how to identify what your ROM ID is. Once you have that edit and save the xml with the same ID.
If your still doing that and nothing comes up then I would have to look further into the situation.
black E
Evolved Member
close
Today
- Join DateMar 2007
- LocationBoca Raton FL
- Posts:545
-
iTrader Positive Feedback100
-
iTrader Feedback Score(77)
-
Likes:185
-
Liked:45 Times in 24 Posts
yes, i did use the right XML file
i htink it might have some thing to do with VISTA ( i copy the file to my desktop, open with notepad, add defenitions, copy back to ecuflash..... the defenitions are in the XML but its not showing up in the ROM)
i htink it might have some thing to do with VISTA ( i copy the file to my desktop, open with notepad, add defenitions, copy back to ecuflash..... the defenitions are in the XML but its not showing up in the ROM)
