**Need Help setting up V7???** Here is your answer
I do two things:
First I change the fuel (load) cut delay to 20000ms so it never looks at the load max, you will want to turn this back on to like 1000ms, which is stock if you want to use the boost/fuel cut.
Second, I max out the load on Fuel Cut to 319 which you would have to change to double load mod if you want enable this if you are above 319 load.
I don't recommend you leave it this way, I would fix it so it is tuned for your car's limit.
First I change the fuel (load) cut delay to 20000ms so it never looks at the load max, you will want to turn this back on to like 1000ms, which is stock if you want to use the boost/fuel cut.
Second, I max out the load on Fuel Cut to 319 which you would have to change to double load mod if you want enable this if you are above 319 load.
I don't recommend you leave it this way, I would fix it so it is tuned for your car's limit.
To be honest, I thought by using the "Fuel Cut Multiplier" I wouldn't hit fuel cut. I found out the other day that isn't the case.
I took your recommedations. Thank you.
I took your recommedations. Thank you.
Evolving Member
Joined: Dec 2005
Posts: 419
Likes: 0
From: Bristol, England
HI can anyone help me, I'm having a small problem with upgrading to the tephra v7. I've managed to download the v7 original rom to the car and it started ok, (ran a little ruff) I then changed the immobilizer code and downloaded everything again and the car ran again, so I then copied all the maps from my old rom across but now it doesn't seem to want to start, I thought I'd managed to do everything correctly but must have done something can anyone offer a suggestion to what i've done? cheers Andy
Load was at 319. I just set the "Boost Cut Delay" to a bazillion... For some reason I was thinking, with mrfreds Fuel cut x2, I didn't need to increase the ms on the delay. I was confused... I'll test it tonight, I hope it was a false alarm. Thanks to you, and others who replied on the subject.
Thread Starter
Joined: Jun 2007
Posts: 2,706
Likes: 15
From: Lexington Park, MD
https://www.evolutionm.net/forums/ec...r-circuit.html
Last edited by Fast_Freddie; Dec 24, 2009 at 09:22 AM.
There is a patch out now for the VIIIs that will allow you to simulate the rear O2 and the heater circuit, which should allow the fuel trims to operate...
https://www.evolutionm.net/forums/ec...r-circuit.html
https://www.evolutionm.net/forums/ec...r-circuit.html